User manual

GO-DSL-N150 User Manual
1.2 LEDs and Interfaces
Front Panel
The following table describes the LEDs of the device.
LEDs Color Status Description
On The device is powered on or the initiation of
the device is successful.
Green
Off The device is powered off.
Power
Red On The device is self-testing, the self-test is
failed or the software is upgrading.
On The device has established a connection
with the physical layer of the office end.
Slow
Blinks
No signal is being detected.
DSL Green
Fast
Blinks
The device is handshaking with the
physical layer of the office end.
On The device has a successful WAN
connection (PPP dial-up is successful) in
the routing mode and no data is being
transmitted on the Internet.
Blinks Data is being transmitted on the Internet in
the routing mode.
Green
Off The device is in the bridged mode.
Internet
Red On In the routing mode, after the successful
synchronization, the WAN connection is
failed (PPP dial-up is failed).
On The LAN connection is nomal and
activated.
LAN4/3
/2/1
Green
Blinks Data is being transmitted on the LAN or
data is being transmitted on the Internet in
the bridged mode.
2