User's Manual
Table Of Contents
30D-Link E15 User Manual
Section 3 - Conguration
Smart Connect
Smart Connect Enable or disable the Smart Connect Feature. When enabled,
only a few conguration options are available to simplify
conguration.
Extended Wi-Fi - Smart Connect Enabled
Status Enable or disable the Extended Wi-Fi wireless network.
Wi-Fi Name (SSID) This is the name of the E15’s extended network. If using
Wi-Fi, the E15 will rebroadcast the uplink router’s Internet
connection under this SSID. You may also manually set the
SSID of the extended network.
Password Enter the password or network key that you wish to use for
the extended Wi-Fi network.
Schedule Use the drop-down menu to select the time schedule that
the rule will be enabled for. The schedule may be set to
Always Enable or you can create your own schedules in the
Schedules
section. Refer to “Schedule” on page 35 for more
information.
Wireless - Smart Connect Disabled
2.4 GHz Extended Wi-Fi
Status Enable or disable the 2.4 GHz network by toggling this slider.
Wi-Fi Name (SSID) This is the name of the E15’s extended network. If using
Wi-Fi, the E15 will rebroadcast the uplink router’s Internet
connection under this SSID. You may also manually set the
SSID of the extended network.
Password Enter the password or network key that you wish to use for
the extended 2.4 GHz network.
Schedule Use the drop-down menu to select the time schedule that the
rule will be enabled for. The schedule may be set to Always
Enable or Always.