User's Manual
Table Of Contents
16D-Link E15 User Manual
Section 3 - Conguration
Wireless Setup Wizard
To access the setup utility for the E15 AX1500 Wi-Fi 6 AI Range Extender on your
PC, rst connect to the E15 wirelessly using the Wi-Fi name (SSID) and password
located on the back of your E15. Then open a web browser and enter http://
dlinkap.local./ in your browser’s URL eld. You may also enter the IP address* of
the E15.
* The default IP address is 192.168.0.50. Once your E15 connects to the host network, it will
be assigned a new IP address based on your network’s DHCP settings. You will need to log
in to your router to see what IP address is assigned to your E15. For multiple E15s, go to
http://dlinkapxxxx.local. as shown on the included Quick Installation Card, with “xxxx”
being the last four digits of the E15’s MAC address.
If this is your rst time logging in to the extender and no connection has been
established, the setup wizard will automatically appear. If the setup process was
not previously completed, then log in to the interface by leaving the password
eld blank.
The setup wizard is designed to guide you through a step-by-step process to congure your new E15
AX1500 Wi-Fi 6 AI Range Extender to extend your wireless network and connect to the Internet via a wireless setup process. To set
your E15 using an Ethernet cable, please refer to “Access Point Mode Settings” on page 23.