Installation guide

DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide
27
LED Indicators
Location LED Color Status Description
Per Device Power1, Power 2 Green Light on (Solid) Power on
Light off Power off
Orange Light on (Solid) Power Supply Failure
Management
(MGMT)
Green Light on (Solid) Link present. No data trans-
mission.
Light blinking Activity. Data transmission.
Light off No link present or the port
was shutdown.
Console Green Light on (Solid) Console on
Light off Console off
Fan 1, Fan 2, Fan 3 Green Light on (Solid) Diagnostics pass. Functioning
normal.
Light off No power.
Orange Light on (Solid) Busy booting or running diag-
nostics.
Light blinking Fan failure
SD Green Light on (Solid) SD plugged in.
Light blinking Busy reading/writing.
Light off No link.
Red Light on (Solid) Read/Write failure.
Stacking ID
(7-segment LED)
Green Light on (1-12) Stacking number displayed.
Light on (H) Stacking Master
Light on (h) Stacking Backup Master
Light on (E) System self-test error
Light on (G) Safeguard Engine in
exhausted mode
LED Per Port
(10/100/1000Mbps)
Link/Act/Speed
Mode
Green Light on (Solid) When there is a secure con-
nection (or link) to 1000Mbps
Ethernet device at any of the
ports.
Light blinking When there is reception or
transmission of data occur
-
ring at 1000Mbps.
Orange Light on (Solid) When there is a secure con-
nection (or link) to 10/
100Mbps Ethernet device at
any of the ports.
Light blinking When there is reception or
transmission of data occur
-
ring at 10/100Mbps.
Off Light off No link