Installation guide

DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide
25
Appendix A - Technical Specifications
Product Specifications
Switch 24-Port 10Gigabit SFP+, Stackable, Expandable, Layer 2/3 switch.
Dimensions 440mm (W) x 506mm (D) x 44mm (H), 19-inch, 1U Rackmount size
Weight 9.84kg (21.6lb)
Internal Power Supply AC Input: 100~240VAC, 50~60Hz, 2.3A
Optional Power Supply DC Input: -48VDC, 5.2A
Fans 3 Removable Fan Modules, Front-to-Back/Back-to-Front Airflow
Removable Media SD Card: Maximum 32Gb SDHC Capacity.
Performance Specifications
Switching Capacity 960Gbps
Packet Forwarding Rate 714.28Mpps
Packet Buffer Size 9 MBytes
MAC Address Table 128K MAC Address Table with 1K Static MAC Addresses
Power Consumption 115.3 Watt (Without expansion module)
IP Routing Tables IPv4/IPv6: 16K Entries
IPv6: 8K Entries
IP Host Tables IPv4: 8K Entries
Jumbo Frame Size 12KBytes
Transmission Method Store-and-forward, Cut-and-through
Forwarding Rates 14,880pps (10M)
148,800pps (100M)
1,488,000pps (1G)
14,880,000pps (10G)
Physical Stacking Supports up to 4 stacking units
Environmental Specifications
Temperature Operating: 0° to 45°C (32° to 113°F)
Storage: -40° to 70°C (-40° to 158°F)
Humidity Operating: 0% to 95% RH, Non-condensing
Storage: 0% to 95% RH, Non-condensing
Heat Dissipation 393.173 BTU/Hr
Emissions CE Class A, FCC Class A, VCCI Class A, C-Tick Class A
Safety CB Report, UL/cUL Listed Mark
Port Specifications
Console Port RJ-45 interface for out-of-band CLI configuration