DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Information in this document is subject to change without notice. Reproduction of this document in any manner whatsoever, without the written permission of the D-Link Corporation, is strictly forbidden. Trademarks used in this text: D-Link and the D-Link logo are trademarks of the D-Link Corporation; Microsoft and Windows are registered trademarks of the Microsoft Corporation.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Intended Readers The DXS-3600-32S Hardware Installation Guide contains detailed information about the hardware specifications of a switch in this series. It also contains brief information on how to configure and manage a switch in this series. This manual is intended for advanced level users that are familiar with network management concepts and terminology.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Safety Cautions To greatly reduce the risk of physical injury, electrical shock, fire, and damage to equipment, observe the following precautions. Observe and follow service markings. • Do not attempt to service any product, except when it is explained in the system’s documentation. • Opening or removing covers that are marked with this ( ) symbol may expose the user to electrical shock.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide • 115V/60Hz is used mostly in North and South America as well as Far Eastern countries like as South Korea and Taiwan • 100V/50Hz is used mostly in Eastern Japan and 100V/60Hz in Western Japan • 230V/50Hz is used mostly in Europe, the Middle East, Africa and the Far East General Precautions for Rack-Mountable Products Please pay careful attention to the following precautions concerning rack stability and safety.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Table of Contents Intended Readers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii Typographical Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii Notes, Notices, and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Appendix C - Module Specifications and Cable Lengths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Introduction Switch Description Package Contents Features Front Panel Components Rear Panel Description Side Panel Description Switch Description The DXS-3600-32S switch is a switch designed to meet the needs and requirements Data Center networks that require Top-of-Rack access switches and Enterprise/Campus aggregation switches, where low latency and high bandwidth capacity is essential.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide If any item is missing or damaged, please contact your local D-Link reseller for replacement. Features This switch is action packed with an abundance of networking features that span inside and outside of the traditional Layer 3 framework. The list below highlights the significant protocols and features supported by this switch.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide • • • Management Information Base (MIBs) for MIBII, Bridge MIB, SNMPv2 MIB, RMON MIB, RMONv2 MIB, Ether-like MIB, 802.3 MAU MIB, 802.1p MIB, IF MIB, RADIUS Authentication Client MIB, IGMPv3 MIB, RIPv2 MIB, IP Forwarding Table MIB (CIDR), IPv4 Multicast Routing MIB, PIM MIB for IPv4, RADIUS Accounting Client MIB, Ping MIB, Trace out MIB, L2 Specific MIB, L3 Specific MIB, OSPFv2 MIB, VRRP MIB, Private MIB, Entity MIB.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide LED Description Fan1, Fan2, Fan3 This LED will light solid green when the fan is operating normally. This LED will light solid orange when the switch is booting up or when a diagnostics test is taking place. This LED will blink orange when a fan fails. This LED will be off when the fan is not receiving power. SD This LED will light solid green if a Secure Digital (SD) card is plugged in.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide For a complete list of SFP/SFP+/WDM transceivers, that are compatible with this switch, refer to the “Product Specifications” section in Appendix A. Rear Panel Description Located on the rear panel of the switch are two power supply module slots and three fan module slots. One power supply module and three fan modules are included in the package for this switch. Any additional power supply module or fan module needs to be bought separately.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Figure 1-4 Side panels of the DXS-3600-32S 6
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Installation Installation Guidelines Installing the Switch without a Rack Installing the Switch into a Rack Installing Transceivers into the Transceiver Ports Installing Power Modules into the Power Module Ports Installing Fan Modules into the Fan Module Ports Installation Guidelines This section will discuss the hardware installation guidelines that the user must follow in order to properly and safely install this switch into the appropriate
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Make sure that there is proper heat dissipation from and adequate ventilation around the switch. Leave at least 10 cm (4 inches) of space at the front and rear of the switch for ventilation. Installing the Switch into a Rack This section is used to guide the user through installing the switch into a switch rack. The switch can be mounted in a standard 19"(1U) rack using the provided mounting brackets. Use the following diagram as a guide.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Figure 2-3 Installing the Switch in a rack Make sure that there is adequate space around the Switch to allow for proper air flow, ventilation, and cooling. Installing Transceivers into the Transceiver Ports The switch is equipped with small form-factor pluggable plus (SFP+) ports that can be used to connect various other networking devices to this switch that do not support the standard copper wiring connection.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Figure 2-4 Inserting SFP transceivers into the Switch’s SFP ports The SFP+ ports also support other transceiver form factors like SFP, SFP+, and WDM transceivers. A complete list of SFP/SFP+/WDM transceivers, compatible with this switch, can be found in the “Port Specifications” section in Appendix A, at the end of this document.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Figure 2-5 Installing an AC Power Supply Module Figure 2-6 Installed AC Power Supply Module In addition, an optional second AC power supply module can be plugged into the second power supply module slot displayed above. When the primary AC power connection fails, the secondary AC power connection will take over all the power immediately and automatically.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Figure 2-7 Installing a DC Power Supply Module Figure 2-8 Connecting a DC Battery to the DC Power Supply Module The DC power and AC power of the device will backup each other immediately when one of the power sources fail. If both power sources fail, unplug the switch. When the power source has been restored, plug the switch’s power back in.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide • Use a minimum of 18 AWG stranded copper wire for grounding. The wire should be long enough to reach from the installed switch to the facility ground point. • Torque screwdriver with a 1/4-inch flat blade. • Ground additional hardware appropriately to the earth ground connection at your site. Installing Fan Modules into the Fan Module Ports Located on the rear panel of this switch there are three fan module ports.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Switch Connections Switch to an End Node Switch to another Switch Switch to a Server Switch Stacking Switch to an End Node End node is a generic name for edge networking devices that will be connected to this switch. Typical examples of end nodes are Personal Computers (PCs), Notebooks, Access Points, Print Servers, VoIP Phones and more. Each end node will be outfitted with a 10/100/1000Mbps, RJ-45, networking port.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Switch to a Server When configuring a network, users will most likely have to add a server or two to this switch. Generally, any port on this switch can be used to connect to a server, as they all operate at a maximum speed of one 10Gbps. What sets this switch apart is the fact that there are powerful software applications available on this switch that specifically caters for better server access, management and security.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Switch Management Management Options Connecting to the Console Port Connecting using SNMP Connecting using the Web User Interface Management Options This switch provides multiple access platforms that can be used to configure, manage and monitor networking features available on this switch. Currently there are three management platforms available and they are described below.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Set the terminal emulation software as follows: • Select the appropriate serial port (COM1 or COM2). • Set the data rate to 115200 baud. • Set the data format to 8 data bits, 1 stop bit, and no parity. • Set flow control to none. Figure 4-1 COM1 Properties - Port Settings • Under Properties, select VT100 for Emulation mode. • Select Terminal keys for Function, Arrow and Ctrl keys.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Boot Procedure V1.00.007 ------------------------------------------------------------------------------Power On Self Test ........................................ MAC Address H/W Version 100 % : 00-11-22-33-45-67 : A1 Please Wait, Loading V1.00.024 Runtime Image .............. UART init ................................................. Starting runtime image Device Discovery .......................................... Configuration init ....
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide DXS-3600-32S>enable DXS-3600-32S#configure terminal DXS-3600-32S(config)#username NewUser password 12345 DXS-3600-32S(config)#username NewUser privilege 15 DXS-3600-32S(config)#line console DXS-3600-32S(config-line)#login local DXS-3600-32S(config-line)#end DXS-3600-32S# Figure 4-5 To create a user account 1 At the CLI command prompt, enter the command ‘enable’ to enter the Privileged EXEC Mode. Press Enter.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide The IP address of the Switch must be configured before it can be managed, by the user, via the Web User Interface. An example to change the IP address of the Switch to ‘10.90.90.90’, using a subnet mask of ‘255.0.0.0’: DXS-3600-32S>enable DXS-3600-32S#configure terminal DXS-3600-32S(config)#interface vlan 1 DXS-3600-32S(config-if)#ip address 10.90.90.90 255.0.0.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide NOTE: For customers interested in D-View, D-Link Corporation's proprietary SNMP management software, go to http://dview.dlink.com.tw/ and download the software and manual. Managed devices that support SNMP include software (referred to as an agent), which runs locally on the device. A defined set of variables (managed objects) is maintained by the SNMP agent and used to manage the device.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Traps Traps are messages that alert network personnel of events that occur on the switch. The events can be as serious as a reboot (someone accidentally turned OFF the switch), or less serious like a port status change. The switch generates traps and sends them to the trap recipient (or network manager). Typical traps include trap messages for Authentication Failure, Topology Change and Broadcast/Multicast Storm.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Figure 4-11 Enter Network Password window As there is no default User name or Password, click OK to proceed. This will open the Web-based User Interface. The switch management features available in the Web-based manager are explained below. Areas of the User Interface After a successful connection to the Web User Interface has been made, the following page should be displayed.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide On this page we will find three main areas to observe. Area Number Function AREA 1 This area displays graphical, real-time images of some of the hardware features running on this switch. Some of the features that can be monitored here are the Device Information, Temperature, CPU Usage, System Log, Fan Status, Memory Usage, and Network Traffic Utilization.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Appendix A - Technical Specifications Product Specifications Switch 24-Port 10Gigabit SFP+, Stackable, Expandable, Layer 2/3 switch. Dimensions 440mm (W) x 506mm (D) x 44mm (H), 19-inch, 1U Rackmount size Weight 9.84kg (21.6lb) Internal Power Supply AC Input: 100~240VAC, 50~60Hz, 2.3A Optional Power Supply DC Input: -48VDC, 5.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Port Specifications Copper Ports Compliant to following standards: (10/100/1000Mbps) • IEEE 802.3 compliance For DXS-3600-EM-8T and DXS-3600-EM-4XT • IEEE 802.3u compliance • IEEE 802.3ab compliance • Support Half/Full-Duplex operations • Auto-negotiation, Auto MDI/MDIX • IEEE 802.3x Flow Control support for Full-Duplex mode, Back Pressure when Half-Duplex mode, and Head-of-line blocking prevention • IEEE 802.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide LED Indicators Location LED Color Status Description Per Device Power1, Power 2 Green Light on (Solid) Power on Light off Power off Orange Light on (Solid) Power Supply Failure Green Light on (Solid) Link present. No data transmission. Light blinking Activity. Data transmission. Light off No link present or the port was shutdown. Light on (Solid) Console on Light off Console off Light on (Solid) Diagnostics pass.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide LED Indicators Location LED Color Status Description LED Per Port Link/Act Green Light on (Solid) When there is a secure connection (or link) to 10Gbps Ethernet device at any of the ports. Light blinking When there is reception or transmission of data occurring at 10Gbps. Light on (Solid) When there is a secure connection (or link) to 1000Mbps Ethernet device at any of the ports.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Appendix B - Cables and Connectors Ethernet Cable When connecting the Switch to another switch, a bridge or hub, a normal cable is necessary. Please review these products for matching cable pin assignment. The following diagrams and tables show the standard RJ-45 receptacle/connector and their pin assignments.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Console Cable When connecting the Switch a PC, a Console cable is necessary. The following diagrams and tables show the standard Console-to-DJ-45 receptacle/connector and their pin assignments.
DXS-3600-32S 10GbE Layer 2/3 Switch Hardware Installation Guide Appendix C - Module Specifications and Cable Lengths Use the following table to as a guide for the module specs and maximum cable lengths.
Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty: • • Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and Only for products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, or addresses with an APO or FPO.
Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK’S PRODUCT
Product Registration Register your D-Link product online at http://support.dlink.com/register/ Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
Tech Support Technical Support You can find software updates and user documentation on the DLink website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the service period, and warranty confirmation service, during the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.
Technical Support United Kingdom (Mon-Fri) Home Wireless/Broadband 0871 873 3000 (9.00am–06.00pm, Sat 10.00am-02.00pm) Managed, Smart, & Wireless Switches, or Firewalls 0871 873 0909 (09.00am – 05.30pm) (BT 10ppm, other carriers may vary.) Ireland (Mon-Fri) All Products 1890 886 899 (09.00am-06.00pm, Sat 10.00am-02.00pm) €0.05ppm peak, €0.045ppm off peak Times Internet http://www.dlink.co.uk ftp://ftp.dlink.co.uk Technische Unterstützung Deutschland: Österreich: Schweiz: Web: http://www.dlink.
Assistance technique Assistance technique D-Link sur internet :http://www.dlink.fr Assistance technique D-Link par téléphone : 01 76 54 84 17 Du lundi au vendredi de 9h à 19h (hors jours fériés) Asistencia Técnica Asistencia Técnica Telefónica de D-Link: +34 902 30 45 45 0,067 €/min De Lunes a Viernes de 9:00 a 19:00 http://www.dlink.es Supporto tecnico Supporto Tecnico dal lunedì al venerdì dalle ore 9.00 alle ore 19.00 con orario continuato Telefono: 02 87366396 http://www.dlink.
Pomoc techniczna Telefoniczna pomoc techniczna firmy D-Link: 0 801 022 021 Pomoc techniczna firmy D-Link świadczona przez Internet: http://www.dlink.eu/support/ Technická podpora Web: http://www.dlink.cz/support/ E-mail: support@dlink.cz Telefon ČR: +420 211 151 640 nebo SK: +421 (0)692 147 110 Telefonická podpora je v provozu: PO - PÁ od 09:00 do 17:00 Volání je zpoplatněno dle příslušných tarifů Vašeho operátora. Technikai Támogatás Tel.
Teknistä tukea asiakkaille Suomessa: Internetin kautta : http://www.dlink.fi Arkisin klo. 09:00 - 18: 00 Numerosta : 0200-555 57 Teknisk Support D-Link Teknisk Support via Internet: http://www.dlink.se D-Link Teknisk Support via telefon: 0770-33 00 35 Vardagar 08:00 - 17:00 Assistência Técnica Assistência Técnica da D-Link na Internet: http://www.dlink.pt e-mail: soporte@dlink.
Tehnička podrška Hvala vam na odabiru D-Link proizvoda. Za dodatne informacije, podršku i upute za korištenje uređaja, molimo vas da posjetite D-Link internetsku stranicu na www.dlink.eu www.dlink.biz/hr Tehnična podpora Zahvaljujemo se vam, ker ste izbrali D-Link proizvod. Za vse nadaljnje informacije, podporo ter navodila za uporabo prosimo obiščite D-Link - ovo spletno stran www.dlink.eu www.dlink.biz/sl Suport tehnic Vă mulţumim pentru alegerea produselor D-Link.
Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers in Australia: Tel: 1300-766-868 24/7 Technical Support Web: http://www.dlink.com.au E-mail: support@dlink.com.au India: Tel: +91-22-27626600 Toll Free 1800-22-8998 Web: www.dlink.co.in E-Mail: helpdesk@dlink.co.in Singapore, Thailand, Indonesia, Malaysia, Philippines, Vietnam: Singapore - www.dlink.com.sg Thailand - www.dlink.co.th Indonesia - www.dlink.co.id Malaysia - www.dlink.com.
Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers in Iran Unit 5, 5th Floor, No. 20, 17th Alley , Bokharest St. , Argentine Sq. , Tehran IRAN Postal Code : 1513833817 Tel: +98-21-88880918,19 +98-21-88706653,54 General Inquiries: info.ir@dlink-me.com Tech Support: support.ir@dlink-me.com Morocco M.I.T.C Route de Nouaceur angle RS et CT 1029 Bureau N° 312 ET 337 Casablanca , Maroc Phone : +212 663 72 73 24 Email: support.na@dlink-me.
Техническая поддержка Обновления программного обеспечения и документация доступны на Интернет-сайте D-Link. D-Link предоставляет бесплатную поддержку для клиентов в течение гарантийного срока. Клиенты могут обратиться в группу технической поддержки D-Link по телефону или через Интернет. Техническая поддержка D-Link: +7(495) 744-00-99 Техническая поддержка через Интернет http://www.dlink.ru e-mail: support@dlink.ru Офисы Украина, 04080 г. Киев , ул. Межигорская, 87-А, офис 18 Тел.
SOPORTE TÉCNICO Usted puede encontrar actualizaciones de softwares o firmwares y documentación para usuarios a través de nuestro sitio www.dlinkla.
Suporte Técnico Caso tenha dúvidas na instalação do produto, entre em contato com o Suporte Técnico D-Link por: Chat Online www.dlink.com.br/suporte E-mail suporte@dlink.com.br Back Office backoffice@dlink.com.br * *Acionar Garantia para 4 ou mais equipamentos Telefones São Paulo: (11) 2755-6950 *GO: 4052-1850 (Ligação local) *Nordeste: 0800-7024104 *Demais Estados: 4062-1850 (Ligação local) *Apenas Modems ADSL Garantia diferenciada vendida pela internet.
D-Link 友訊科技 台灣分公司 技術支援資訊 如果您還有任何本使用手冊無法協助您解決的產品相關問題，台灣 地區用戶可以透過我們的網站、電子郵件或電話等方式與D-Link台灣 地區技術支援工程師聯絡。 D-Link 免付費技術諮詢專線 0800-002-615 服務時間：週一至週五，早上9:00到晚上9:00 (不含周六、日及國定假日) 網 站：http://www.dlink.com.tw 電子郵件：dssqa_service@dlink.com.tw 如果您是台灣地區以外的用戶，請參考D-Link網站全球各地 分公司的聯絡資訊以取得相關支援服務。 產品保固期限、台灣區維修據點查詢，請參考以下網頁說明： http://www.dlink.com.
Dukungan Teknis Update perangkat lunak dan dokumentasi pengguna dapat diperoleh pada situs web D-Link. Dukungan Teknis untuk pelanggan: Dukungan Teknis D-Link melalui telepon: Tel: +62-21-5731610 Dukungan Teknis D-Link melalui Internet: Email : support@dlink.co.id Website : http://support.dlink.co.
Technical Support この度は弊社製品をお買い上げいただき、誠にありがとうご ざいます。 下記弊社 Web サイトからユーザ登録及び新製品登録を 行っていただき、ダウンロードサービスにて サポート情報、ファームウェア、ユーザマニュアルを ダウンロードすることができます。 ディーリンクジャパン Web サイト URL:http://www.dlink-jp.
技术支持 办公地址：北京市东城区北三环东路 36 号 环球贸易中心 B 座 26F 02-05 室 邮编: 100013 技术支持中心电话：8008296688/ (028)66052968 技术支持中心传真：(028) 87300889 各地维修中心地址请登陆官方网站查询 网址：http://www.dlink.com.
Registration Card All Countries and Regions Excluding USA Print, type or use block letters. Your name: Mr./Ms_____________________________________________________________________________ Organization: ________________________________________________ Dept.
