Information in this document is subject to change without notice. Reproduction of this document in any manner whatsoever, without the written permission of the D-Link Corporation, is strictly forbidden. Trademarks used in this text: D-Link and the D-Link logo are trademarks of the D-Link Corporation; Microsoft and Windows are registered trademarks of the Microsoft Corporation.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Table of Contents Intended Readers ......................................................................................................................................................... v Typographical Conventions .......................................................................................................................................... v Notes, Notices, and Cautions ................................................
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Single Unified Switch Deployment.......................................................................................................................... 28 Peer Unified Switch Deployment ............................................................................................................................ 28 Chapter 6 Appendix Section ............................................................................................
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Intended Readers Intended Readers Typographical Conventions Notes, Notices, and Cautions Safety Instructions General Precautions for Rack-Mountable Products Protecting Against Electrostatic Discharge The DWS-3160 Series Hardware Installation Guide contains detailed information about the hardware specifications of a Switch in this series. It also contains brief information on how to configure and manage a Switch in this series.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Safety Instructions Please pay careful attention to the following safety guidelines to ensure your own personal safety and to help protect your system from potential damage. Safety Cautions To greatly reduce the risk of physical injury, electrical shock, fire, and damage to equipment, observe the following precautions. Observe and follow service markings.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide • Do not modify power cables or plugs. Consult a licensed electrician or your power company for site modifications. Always follow your local or national wiring rules. When connecting or disconnecting power to and from hot-pluggable power supplies, observe the following guidelines: • Install the power supply before connecting the power cable to the power supply. • Unplug the power cable before removing the power supply.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Protecting Against Electrostatic Discharge Static electricity can harm delicate components inside the system. To prevent static damage, discharge static electricity from your body before touching any of the electronic components, such as the microprocessor. This can be done by periodically touching an unpainted metal surface on the chassis. The following steps can also be taken prevent damage from electrostatic discharge (ESD): 1.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Chapter 1 Introduction Switch Description Package Contents Features Ports Front Panel Components LED Indicators Rear Panel Description Side Panel Description Switch Description The DWS-3160 Series Gigabit Ethernet Unified Switch is specifically tailored for a small and remote office environment and fulfills the growing demand of wireless unified switches in this segment.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Features This Switch series is action packed with an abundance of networking features that span inside and outside of the traditional Layer 2 framework making it truly a Layer 2+ Switch. The list below highlights the significant protocols and features supported by this Switch. Local Area Networking (LAN) features that can be found on this Switch series are: • Virtual Stacking otherwise known as Clustering.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide • Management Information Base (MIBs) for MIBII, Bridge MIB, SNMPv2 MIB, RMON MIB, RMONv2 MIB, Ether-like MIB, 802.1p MIB, IF MIB, RADIUS Authentication Client MIB, RADIUS Accounting Client MIB, Ping and Traceroute MIB, Private MIB, IPv6 MIB, IP MIB, TCP MIB, Zone Defense MIB, UDP, ICMP, ARP, Entity MIB, and TCP/IP-based Internet.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Front Panel Components The Front panel of the Switch consists of a Console port, LED indicators, Copper (10/100/1000Mbps) ports, SFP (10/1000Mbps) ports and an SD Card slot. Figure 1- 1. Front panel view of the DWS-3160-24TC Figure 1- 2. Front panel view of the DWS-3160-24PC A separate table below describes LED indicators in more detail.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide LED Description Power This LED will light solid green after the Switch has been powered on successfully. This LED will be off when the Switch is no longer receiving power (i.e. powered off). Console This LED will blink green during the Power-On Self Test (POST). This LED will light solid green when a user is logged in through the console port.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide 100~240VAC at 50~60Hz. In addition, an optional external Redundant Power Supply (DPS-200 for the DWS-3124-24TC and DPS-700 for the DWS-3124-24PC) can be plugged into the connector displayed above. When the internal power fails, this optional external RPS will take over all the power immediately and automatically.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Chapter 2 Installation Installation Guidelines Connecting to a Redundant Power Supply Installation Guidelines This section will discuss the hardware installation guidelines that the user must follow in order to properly and safely install this Switch into the appropriate environment.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Figure 2- 2. Fasten mounting brackets on the Switch Fasten the mounting brackets supplied to the sides of the Switch using the screws provided. With the brackets attached securely, the Switch can be mounted in a standard rack, as shown below. Figure 2- 3. Installing the Switch in a rack Make sure that there is adequate space around the Switch to allow for proper air flow, ventilation, and cooling.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Figure 2- 4. Inserting SFP transceivers into the Switch’s SFP ports A complete list of SFP transceivers, compatible with this Switch, can be found in the Appendix section, at the end of this document. Connecting to a Redundant Power Supply This Switch can be connected to the Redundant Power Supply (RPS) using either a 14-pin DC power cable or a 22pin DC power cable.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Figure 2- 5. Connecting the DWS-3160-24TC to the DPS-200 To connect the DPS-200 to the Switch for the first time, follow these steps: 1. Disconnect the power cable from the power connector of the Switch. 2. Interlink the RPS ports of the Switch and the DPS-200 by using the 14-pin DC power cable, supplied with the RPS. 3.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Figure 2- 6. Connecting the DWS-3160-24PC to the DPS-700 To connect the DPS-700 to the Switch for the first time, follow these steps: 1. Disconnect the power cable from the power connector of the Switch. 2. Interlink the RPS ports of the Switch and the DPS-700 by using the 22-pin DC power cable, supplied with the RPS. 3.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Figure 2- 7. Front view of the DPS-700 RPS Rack-Mountable Chassis, the DPS-800 Because of the small size of the DPS-200, the DPS-800 can be used to house and mount the DPS-200 into a switch rack. The DPS-800 is a standard-size rack mount (1U) designed to hold up to two DPS-200 redundant power supplies. Using this rack mount chassis, will allow the user to save space when deploying the DPS-200 RPS’s into a switch rack.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Figure 2- 9. Installing the DPS-800 in an Equipment Rack NOTE: The DPS-800 is NOT equipped with any power supplies on its own. This is a 2-slot, rackmountable chassis. RPS Rack-Mountable Chassis, the DPS-900 Because of the small size of the DPS-200, the DPS-900 can be used to house and mount the DPS-200 into a switch rack.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide The RPS can be mounted in a standard 19" rack. Use the following diagram to guide you. Figure 2- 11. Installing the DPS-900 into the equipment rack NOTE: The DPS-900 is NOT equipped with any power supplies on its own. This is an 8-slot, rackmountable chassis.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Chapter 3 Switch Connections Switch to an End Node Switch to another Switch Switch to a Server Switch to an Access Point directly Switch to an End Node End node is a generic name for edge networking devices that will be connected to this Switch. Typical examples of end nodes are Personal Computers (PCs), Notebooks, Access Points, Print Servers, VoIP Phones and more.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Switch to a Server When configuring a network, users will most likely have to add a Server or two to this Switch. Generally, any port on this Switch can be used to connect to a Server, as they all operate at a maximum speed of one Gigabit per second.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Chapter 4 Switch Management Management Options Connecting to the Console Port Connecting using SNMP Connecting using the Web User Interface Management Options This Switch series provides multiple access platforms that can be used to configure, manage and monitor networking features available on this Switch. Currently there are three management platforms available and they are described below.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Set the terminal emulation software as follows: • Select the appropriate serial port (COM1 or COM2). • Set the data rate to 115200 baud. • Set the data format to 8 data bits, 1 stop bit, and no parity. • Set flow control to none. Figure 4- 1. COM1 Properties • Under Properties, select VT100 for Emulation mode. • Select Terminal keys for Function, Arrow and Ctrl keys.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Boot Procedure V1.00.001 ------------------------------------------------------------------------------Power On Self Test ........................................ MAC Address H/W Version 100 % : 00-11-22-33-45-67 : A1 Please Wait, Loading V1.00.037 Runtime Image .............. UART init ................................................. Starting runtime image Device Discovery ..........................................
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Creating a User Account As you will have noticed by now is that this Switch does not have a default username and password. One of the first and most important tasks will be to create user accounts. Logging in using a predefined administrator-level username will give the user privileged access to the Switch's management software. Also this will prevent unauthorized access to the Switch, and record the passwords for future reference.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide DWS-3160-24PC:admin#show switch Command: show switch Device Type : DWS-3160-24PC Gigabit Ethernet Switch MAC Address : 00-11-22-33-45-67 IP Address : 10.90.90.90 (Manual) VLAN Name : default Subnet Mask : 255.0.0.0 Default Gateway : 0.0.0.0 Boot PROM Version : Build 1.00.001 Firmware Version : Build 1.00.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Connecting using SNMP The Switch can be managed with an SNMP-compatible console program. The Simple Network Management Protocol (SNMP) operates on the Application Layer of the OSI model and is designed specifically for managing and monitoring network devices. The SNMP agent decodes the incoming SNMP messages and responds to requests with MIB objects stored in the database.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide DWS-3160-24PC:admin# show snmp community Command: show snmp community SNMP Community Table Community Name View Name Access Right -------------------------------- -------------------------------- ------------ private public CommunityView CommunityView read_write read_only Total Entries: 2 DWS-3160-24PC:admin# Figure 4- 9.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Connecting using the Web User Interface All software functions of the Switch can be managed, configured, and monitored via the embedded Web-based (HTML) interface. This can be done from any remote station on the network through a standard web browser, such as Internet Explorer (version 5.5 and later), Mozilla Firefox (version 2.0 and later), Safari (version 4.0 and later), or Google Chrome (version 6.0 and later).
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Areas of the User Interface After a successful connection to the Web User Interface has been made, the following page should be displayed. AREA 2 AREA 1 AREA 3 Figure 4- 12. Main Web Manager window On this page we will find three main areas to observe. Area Number Function AREA 1 This area is divided up into two main sections.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Chapter 5 D-Link Unified Access System D-Link Unified Access System Components D-Link Unified Access System Topology The D-Link Unified Access System is a wireless local area network (WLAN) solution that enables WLAN deployment while providing state-of-the-art wireless networking features. It is a scalable solution that provides secure wireless connectivity and seamless layer 2 and layer 3 roaming for end users.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide management and streamline the AP upgrade process by pushing configuration profiles and software upgrades from the Unified Switch to the managed APs. The Web UI Reference Guide and the CLI Reference Guide primarily describes the D-Link Access Point in Managed Mode.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide D-Link Unified Access System Topology The WLAN network topology you use depends on the size and requirements of your network. Small-to-medium networks might require only one Unified Switch that manages a few D-Link Access Points. For larger networks that need greater roaming capabilities for wireless clients, a deployment with multiple peer switches that each manages several APs might be appropriate.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Figure 5-3 Unified Access System Deployment with 3 Unified Switches Peer Unified Switches share information about APs and allow Layer 3 roaming among them. To support this, peer Unified Switches establish IPv4 tunnels so that the wireless client keeps the same IP address even when the client associates with an access point in a different subnet.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Chapter 6 Appendix Section Appendix A – Technical Specifications General Feature Detailed Description Standards IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3z 1000BASE-T (SFP “Mini GBIC”) IEEE 802.1D/2004/Spanning Tree (802.1s, 802.1w) IEEE 802.1Q-2005 VLAN IEEE 802.1p Priority Queues IEEE 802.1X Network Access Control IEEE 802.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Storage: 5% ~ 90% RH non-condensing Dimensions DWS-3160-24TC: 440mm (W) x 210mm (D) x 44mm (H) DWS-3160-24PC: 440mm (W) x 310mm (D) x 44mm (H) Weight DWS-3160-24TC: 2.552kg. DWS-3160-24PC: 5.242kg. SD Card At least 4G supported. Power-over-Ethernet IEEE 802.3af and 802.3at compliance. Provides up to 15.4 Watts for 802.3af compliant devices. Provides up to 30 Watts for 802.3at compliant devices. System PoE power budget: 740W.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Fan Err Light off RPS off Blinking When any of the fans has failed Light off When all fans work normally Solid Light A LED Mode Select Button to switch Link/Act/Speed Mode Solid Light A LED Mode Select Button to switch PoE Mode Solid Light When there is a secure connection (or link) to 1000Mbps Ethernet device at any of the ports. Blinking When there is reception or transmission of data occurring at 1000Mbps.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide • SFP Ports (1000Mbps) IEEE 802.3ab compliance • Support Half/Full-Duplex operations • Auto-negotiation, Auto MDI/MDIX • IEEE 802.3x Flow Control support for Full-Duplex mode, Back Pressure when HalfDuplex mode, and Head-of-line blocking prevention Compliant to following standards: • IEEE 802.3z compliance • IEEE 802.3x Flow Control support for Full-Duplex mode.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Up to 1024 concurrent on-line users. Support up to 6 customized web pages.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Appendix B – Cables and Connectors Ethernet Cable When connecting the Switch to another switch, a bridge or hub, a normal cable is necessary. Please review these products for matching cable pin assignment. The following diagrams and tables show the standard RJ-45 receptacle/connector and their pin assignments. Figure B- 1.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Console Cable When connecting the Switch a PC, a Console cable is necessary. The following diagrams and tables show the standard Console-to-DJ-45 receptacle/connector and their pin assignments. Figure B- 2.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Redundant Power Supply (RPS) Cable When connecting the Switch to a Redundant Power Supply, an RPS cable is necessary. Please review these products for matching cable pin assignment.The following diagrams and tables show the standard RPS receptacle/connector and their pin assignments. 14-pin DC power cable Figure B- 3.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide 22-pin DC power cable Figure B- 4.
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Appendix C – Module Specifications and Cable Lengths Use the following table to as a guide for the module specs and maximum cable lengths.
Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty: Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and Only for products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, or addresses with an APO or FPO.
Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK’S PRODUCT
Product Registration Register your D-Link product online at http://support.dlink.com/register/ Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
Tech Support Technical Support You can find software updates and user documentation on the DLink website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the service period, and warranty confirmation service, during the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.
Technical Support United Kingdom (Mon-Fri) Home Wireless/Broadband 0871 873 3000 (9.00am–06.00pm, Sat 10.00am-02.00pm) Managed, Smart, & Wireless Switches, or Firewalls 0871 873 0909 (09.00am – 05.30pm) (BT 10ppm, other carriers may vary.) Ireland (Mon-Fri) All Products 1890 886 899 (09.00am-06.00pm, Sat 10.00am-02.00pm) €0.05ppm peak, €0.045ppm off peak Times Internet http://www.dlink.co.uk ftp://ftp.dlink.co.uk Technische Unterstützung Deutschland: Österreich: Schweiz: Web: http://www.dlink.
Assistance technique Assistance technique D-Link sur internet :http://www.dlink.fr Assistance technique D-Link par téléphone : 0820 0803 03 0.12 € TTC/min depuis un poste fixe Du lundi au vendredi de 9h à 19h (hors jours fériés) Asistencia Técnica Asistencia Técnica Telefónica de D-Link: +34 902 30 45 45 0,067 €/min De Lunes a Viernes de 9:00 a 19:00 http://www.dlink.es Supporto tecnico Supporto Tecnico dal lunedì al venerdì dalle ore 9.00 alle ore 19.
Pomoc techniczna Telefoniczna pomoc techniczna firmy D-Link: 0 801 022 021 Pomoc techniczna firmy D-Link świadczona przez Internet: http://www.dlink.eu/support/ Technická podpora Web: http://www.dlink.cz/support/ E-mail: support@dlink.cz Telefon ČR: +420 211 151 640 nebo SK: +421 (0)692 147 110 Telefonická podpora je v provozu: PO - PÁ od 09:00 do 17:00 Volání je zpoplatněno dle příslušných tarifů Vašeho operátora. Technikai Támogatás Tel.
Teknistä tukea asiakkaille Suomessa: Internetin kautta : http://www.dlink.fi Arkisin klo. 9 - 21 Numerosta : 0600 155 57 Teknisk Support D-Link Teknisk Support via Internet: http://www.dlink.se D-Link Teknisk Support via telefon: 0900-100 77 00 Vardagar 08:00-20:00 Assistência Técnica Assistência Técnica da D-Link na Internet: http://www.dlink.pt e-mail: soporte@dlink.
Tehnička podrška Hvala vam na odabiru D-Link proizvoda. Za dodatne informacije, podršku i upute za korištenje uređaja, molimo vas da posjetite D-Link internetsku stranicu na www.dlink.eu www.dlink.biz/hr Tehnična podpora Zahvaljujemo se vam, ker ste izbrali D-Link proizvod. Za vse nadaljnje informacije, podporo ter navodila za uporabo prosimo obiščite D-Link - ovo spletno stran www.dlink.eu www.dlink.biz/sl Suport tehnic Vă mulţumim pentru alegerea produselor D-Link.
Technical Support You can find software updates and user do cumentation on the D-Link website. Tech Support for customers in Australia: Tel: 1300-766-868 24/7 Technical Support Web: http://www.dlink.com.au E-mail: support@dlink.com.au India: Tel: +91-22-27626600 Toll Free 1800-22-8998 Web: www.dlink.co.in E-Mail: helpdesk@dlink.co.in Singapore, Thailand, Indonesia, Malaysia, Philippines, Vietnam: Singapore - www.dlink.com.sg Thailand - www.dlink.co.th Indonesia - www.dlink.co.id Malaysia - www.dlink.com.
Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers in Iran Unit 5, 5th Floor, No. 20, 17th Alley , Bokharest St. , Argentine Sq. , Tehran IRAN Postal Code : 1513833817 Tel: +98-21-88880918,19 +98-21-88706653,54 General Inquiries: info.ir@dlink-me.com Tech Support: support.ir@dlink-me.com Morocco M.I.T.C Route de Nouaceur angle RS et CT 1029 Bureau N° 312 ET 337 Casablanca , Maroc Phone : +212 663 72 73 24 Email: support.na@dlink-me.
Техническая поддержка Обновления программного обеспечения и документация доступны на Интернет-сайте D-Link. D-Link предоставляет бесплатную поддержку для клиентов в течение гарантийного срока. Клиенты могут обратиться в группу технической поддержки D-Link по телефону или через Интернет. Техническая поддержка D-Link: +7(495) 744-00-99 Техническая поддержка через Интернет http://www.dlink.ru e-mail: support@dlink.ru Офисы Украина, 04080 г. Киев , ул. Межигорская, 87-А, офис 18 Тел.
SOPORTE TÉCNICO Usted puede encontrar actualizaciones de softwares o firmwares y documentación para usuarios a través de nuestro sitio www.dlinkla.
Suporte Técnico Caso tenha dúvidas na instalação do produto, entre em contato com o Suporte Técnico D-Link por: Chat Online www.dlink.com.br/suporte E-mail suporte@dlink.com.br Back Office backoffice@dlink.com.br * *Acionar Garantia para 4 ou mais equipamentos Telefones São Paulo: (11) 2755-6950 *GO: 4052-1850 (Ligação local) *Nordeste: 0800-7024104 *Demais Estados: 4062-1850 (Ligação local) *Apenas Modems ADSL Garantia diferenciada vendida pela internet.
D-Link 友訊科技 台灣分公司 技術支援資訊 如果您還有任何本使用手冊無法協助您解決的產品相關問題，台灣 地區用戶可以透過我們的網站、電子郵件或電話等方式與D-Link台灣 地區技術支援工程師聯絡。 D-Link 免付費技術諮詢專線 0800-002-615 服務時間：週一至週五，早上9:00到晚上9:00 (不含周六、日及國定假日) 網 站：http://www.dlink.com.tw 電子郵件：dssqa_service@dlink.com.tw 如果您是台灣地區以外的用戶，請參考D-Link網站全球各地 分公司的聯絡資訊以取得相關支援服務。 產品保固期限、台灣區維修據點查詢，請參考以下網頁說明： http://www.dlink.com.
Dukungan Teknis Update perangkat lunak dan dokumentasi pengguna dapat diperoleh pada situs web D-Link. Dukungan Teknis untuk pelanggan: Dukungan Teknis D-Link melalui telepon: Tel: +62-21-5731610 Dukungan Teknis D-Link melalui Internet: Email : support@dlink.co.id Website : http://support.dlink.co.
Technical Support この度は弊社製品をお買い上げいただき、誠にありがとうご ざいます。 下記弊社 Web サイトからユーザ登録及び新製品登録を 行っていただき、ダウンロードサービスにて サポート情報、ファームウェア、ユーザマニュアルを ダウンロードすることができます。 ディーリンクジャパン Web サイト URL:http://www.dlink-jp.
技术支持 办公地址：北京市东城区北三环东路 36 号 环球贸易中心 B 座 26F 02-05 室 邮编: 100013 技术支持中心电话：8008296688/ (028)66052968 技术支持中心传真：(028)85176948 各地维修中心地址请登陆官方网站查询 网址：http://www.dlink.com.
Registration Card All Countries and Regions Excluding USA Print, type or use block letters. Your name: Mr./Ms_____________________________________________________________________________ Organization: ________________________________________________ Dept.
