System information

89
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
IP Services Commands
set snmp usm (continued)
auth-type {none | md5 | sha} Specifies the authentication type used to authenticate
{auth-pass-phrase string communications with the remote SNMP engine. You can
| auth-key hex-string} specify one of the following:
• none - No authentication is used.
• md5 - Message-digest algorithm 5 is used.
• sha - Secure Hashing Algorithm (SHA) is used.
If the authentication type is md5 or sha, you can
specify a passphrase or a hexadecimal key.
• To specify a passphrase, use the
auth-pass-phrase string option. The string can be
from 8 to 32 alphanumeric characters long, with
no spaces.
• To specify a key, use the auth-key hex-string
option.
encrypt-type {none | des Specifies the encryption type used for SNMP traffic. You
| 3des | aes} can specify one of the following:
{encrypt-pass-phrase string | • none - No encryption is used. This is the default.
encrypt-key hex-string} • des - Data Encryption Standard (DES)
encryption is used.
• 3des - Triple DES encryption is used.
• aes - Advanced Encryption Standard (AES)
encryption is used.
If the encryption type is des, 3des, or aes, you
can specify a passphrase or a hexadecimal key.
• To specify a passphrase, use the
encrypt-pass-phrase string option. The string can
be from 8 to 32 alphanumeric characters long,
with no spaces.
• To specify a key, use the encrypt-key hex-string
option.