System information

386
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
System Log Commands
+|-|/number-of-
messages
Displays the number of messages specified as
follows:
• A positive number (for example, +100),
displays that number of log entries starting
from the oldest in the log.
• A negative number (for example, -100)
displays that number of log entries starting
from newest in the log.
• A number preceded by a slash (for example,
/100) displays that number of the most recent
log entries in the log, starting with the least
recent.
facility facility-
name
Area of MSS that is sending the log message.
Type a space and a question mark (?) after
show log trace facility for a list of valid facilities.
matching string Displays messages that match a string - for
example, a username or IP address.
severity severity-
level
Displays messages at a severity level greater
than or equal to the level specified. Specify one
of the following:
• emergency - The switch is unusable.
• alert - Action must be taken immediately.
• critical - You must resolve the critical
conditions. If the conditions are not resolved,
the switch can reboot or shut down.
• error - The switch is missing data or is unable
to form a connection.
• warning - A possible problem exists.
• notice - Events that potentially can cause
system problems have occurred. These are
logged for diagnostic purposes. No action is
required.
• info - Informational messages only. No
problem exists.
• debug - Output from debugging.
Defaults: None.
Access: Enabled.