System information

377
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
Snoop Commands
show snoop
Displays the AP radio mapping for all snoop filters.
Syntax: show snoop
Defaults: None.
Access: Enabled.
Usage: To display the mappings for a specific AP radio, use the show snoop map
command.
Examples: The following command shows the AP radio mappings for all snoop filters
configured on a switch:
DWS-1008# show snoop
Dap: 3 Radio: 2
snoop1
snoop2
Dap: 2 Radio: 2
snoop2
show snoop info
Shows the configured snoop filters.
Syntax: show snoop filter-name
filter-name Name of the snoop filter.
Defaults: None.
Access: Enabled.
Examples: The following command shows the snoop filters configured in the examples
above:
DWS-1008# show snoop info
snoop1:
observer 10.10.30.2 snap-length 100
all packets
snoop2:
observer 10.10.30.3 snap-length 100
frame-type eq data
mac-pair (aa:bb:cc:dd:ee:ff, 11:22:33:44:55:66)