System information

358
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
File Management Commands
DWS-1008# dir
=============================================================
file:
Filename Size Created
file:configuration 17 KB May 21 2004, 18:20:53
file:configuration.txt 379 bytes May 09 2004, 18:55:17
corp2/ 512 bytes May 21 2004, 19:22:09
corp_a/ 512 bytes May 21 2004, 19:15:48
file:dangcfg 13 KB May 16 2004, 18:30:44
dangdir/ 512 bytes May 16 2004, 17:23:44
old/ 512 bytes Sep 23 2003, 21:58:48
Total: 33 Kbytes used, 207822 Kbytes free
=============================================================
Boot:
Filename Size Created
*boot0:bload 746 KB May 09 2004, 19:02:16
*boot0:030000.020 8182 KB May 09 2004, 18:58:16
boot1:030000.020 8197 KB May 21 2004, 18:01:02
Boot0: Total: 8928 Kbytes used, 3312 Kbytes free
Boot1: Total: 8197 Kbytes used, 4060 Kbytes free
=============================================================
temporary files:
Filename Size Created
Total: 0 bytes used, 93537 Kbytes free
reset system
Restarts a DWS-1008 switch and reboots the software.
Syntax: reset system [force]
force
Immediately restarts the system and reboots,
without comparing the running configuration to
the configuration file.
Defaults: None.
Access: Enabled.
Usage: If you do not use the force option, the command first compares the running
configuration to the configuration file. If the running configuration and configuration
file do not match, MSS does not restart the switch but instead displays a message
advising you to either save the configuration changes or use the force option.
Examples: The following command restarts a switch that does not have any
unsaved configuration changes: