System information

343
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
RF Detection Commands
show rfdetect clients Output
Field Description
Client MAC MAC address of the client.
Client Vendor Company that manufactures or sells the
client.
AP MAC MAC address of the radio with which the
rogue client is associated.
AP Vendor Company that manufactures or sells the AP
with which the rogue client is associated.
Port/Radio/Channel Port number, radio number, and channel
number of the radio that detected the rogue.
For a Distributed AP, the connection number
is labeled dap. (This stands for distributed
ap.)
NoL Number of listeners. This is the number of
AP radios that detected the rogue client.
Type Classification of the rogue device:
• rogue - Wireless device that is on the
network but is not supposed to be on the
network.
• intfr - Wireless device that is not part
of your network and is not a rogue, but
might be causing RF interference with AP
radios.
• known - Device that is a legitimate
member of the network.
Last seen Number of seconds since an AP radio last
detected 802.11 packets from the device.
show rfdetect clients mac Output
Field Description
RSSI Received signal strength indication (RSSI)
- the strength of the RF signal detected
by the AP radio, in decibels referred to
1 milliwatt (dBm).
Rate The data rate of the client.
Last Seen Number of seconds since an AP radio last
detected 802.11 packets from the device.
BSSID MAC address of the SSID with which the
rogue client is associated.
Vendor Company that manufactures or sells the AP
with which the rogue client is associated.