System information

334
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
Session Management Commands
State Status of the session:
• AUTH, ASSOC REQ—Client is being associated
by the 802.1X protocol.
• AUTH AND ASSOC—Client is being associated
by the 802.1X protocol, and the user is being
authenticated.
• AUTHORIZING—User has been authenticated
(for example, by the 802.1X protocol and an AAA
method), and is entering AAA authorization.
• AUTHORIZED—User has been authorized by
an AAA method.
• ACTIVE—User’s AAA attributes have been
applied, and the user is active on the network.
• DEASSOCIATED—One of the following:
• Wireless client has sent the switch a
disassociate message.
• STATUS UPDATED—Switch is receiving a final
update from an access point about the user, who
has roamed away.
• WIRED AUTH’ING—User is being authenticated
by the 802.1X protocol on a wired authentication
port.
• KILLING—User’s session is being cleared,
because of 802.1X authentication failure, entry of a
clear command, or some other event.
Port/Radio Number of the port and radio through which the user is
accessing this session.
MAC address MAC address of the session user.
User Name Name of the authenticated user of this session
IP Address IP address of the session user.
Vlan Name Name of the VLAN associated with the session.
Tag System-wide supported VLAN tag type.
Session Timeout Assigned session timeout in seconds.
Authentication
Method
Extensible Authentication Protocol (EAP) type used to
authenticate the session user, and the IP address of
the authentication server.
Session statistics
as updated from
AP
Time the session statistics were last updated from the
access point, in seconds since a fixed standard date
and time.
Unicast packets in Total number of unicast packets received from the user
by the switch (64-bit counter).