System information

321
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
802.1x Management Commands
Defaults: WEP key rotation is enabled, by default.
Access: Enabled.
Usage: Reauthentication is not required for WEP key rotation to take place.
Broadcast and multicast keys are always rotated at the same time, so all members
of a given radio, VLAN, or encryption type receive the new keys at the same
time.
Examples: Type the following command to disable WEP key rotation:
DWS-1008# set dot1x wep-rekey disable
success: wep rekeying disabled
set dot1x wep-rekey-period
Sets the interval for rotating the WEP broadcast and multicast keys.
Syntax: set dot1x wep-rekey-period seconds
seconds Specify a value between 30 and 1,641,600
(19 days).
Defaults: The default is 1800 seconds (30 minutes).
Access: Enabled.
Examples: Type the following command to set the WEP-rekey period to 300 seconds:
DWS-1008# set dot1x wep-rekey-period 300
success: dot1x wep-rekey-period set to 300
show dot1x
Displays 802.1X client information for statistics and configuration settings.
Syntax: show dot1x {clients | stats | config}
clients
Displays information about active 802.1X clients,
including client name, MAC address, and state.
stats
Displays global 802.1X statistics associated with
connecting and authenticating.
config
Displays a summary of the current configuration.