System information

313
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
802.1x Management Commands
Examples: Type the following command to reset the maximum number of reauthorization
attempts to the default:
DWS-1008# clear dot1x reauth-max
success: change accepted.
clear dot1x reauth-period
Resets the time period that must elapse before a reauthentication attempt, to the default time
period.
Syntax: clear dot1x reauth-period
Defaults: The default is 3600 seconds (1 hour).
Access: Enabled.
Examples: Type the following command to reset the default reauthentication time period:
DWS-1008# clear dot1x reauth-period
success: change accepted.
clear dot1x timeout auth-server
Resets to the default setting the number of seconds that must elapse before the switch
times out a request to a RADIUS server.
Syntax: clear dot1x timeout auth-server
Defaults: The default is 30 seconds.
Access: Enabled.
Examples: To reset the default timeout for requests to an authentication server, type the
following command:
DWS-1008# clear dot1x timeout auth-server
success: change accepted.
clear dot1x timeout supplicant
Resets to the default setting the number of seconds that must elapse before the switch
times out an authentication session with a supplicant (client).