System information

309
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
RADIUS Commands
set server group
Configures a group of one to four RADIUS servers.
Syntax: set server group group-name members server-name1 [server-name2] [server-
name3] [server-name4]
group-name Server group name of up to 32 characters, with
no spaces or tabs.
members
server-name1
server-name2
server-name3
server-name4
The names of one or more configured RADIUS
servers. You can enter up to four server names.
Defaults: None.
Access: Enabled.
Usage: You must assign all group members simultaneously, as shown in the
example. To enable load balancing, use set server group load-balance
enable.
Do not use the same name for a RADIUS server and a RADIUS server group.
Examples: To set server group shorebirds with members heron, egret, and sandpiper,
type the following command:
DWS-1008# set server group shorebirds members heron egret sandpiper
success: change accepted.
set server group load-balance
Enables or disables load balancing among the RADIUS servers in a server group.
Syntax: set server group group-name load-balance {enable | disable}
group-name Server group name of up to 32 characters.
load-balance
enable | disable
Enables or disables load balancing of
authentication requests among the servers in the
group.