System information

306
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
RADIUS Commands
[acct-port acct-udp-port-number] [port udp-port-number] key string
address
ipaddress
IP address of the third-party AP. Enter the address
in dotted decimal notation.
port udp-
portnumber
UDP port on which the switch listens for RADIUS
access-requests from the AP.
acct-port
acct-udp-
portnumber
UDP port on which the switch listens for RADIUS
stop-accounting records from the AP.
key string Password (shared secret key) the switch
uses to authenticate and encrypt RADIUS
communication.
Defaults: The default UDP port number for access-requests is 1812. The default UDP
port number for stop-accounting records is 1813.
Access: Enabled.
Usage: AAA for third-party AP users has additional configuration requirements.
Examples: The following command configures a RADIUS proxy entry for a third-party AP
RADIUS client at 10.20.20.9, sending RADIUS traffic to the default UDP
ports 1812 and 1813 on the switch:
DWS-1008# set radius proxy client address 10.20.20.9 key radkey1
success: change accepted.
set radius proxy port
Configures the switch port connected to a third-party AP as a RADIUS proxy for the SSID
supported by the AP.
Syntax: set radius proxy port port-list [tag tag-value] ssid ssid-name
port port-list Switch port(s) connected to the third-party AP.
tag tag-value 802.1Q tag value in packets sent by the third-
party AP for the SSID.
ssid ssid-name SSID supported by the third-party AP.
Defaults: None.