System information

299
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
Cryptography Commands
show crypto key ssh
Displays SSH authentication key information. This command displays the checksum (also
called a fingerprint) of the public key. When you connect to the switch with an SSH client, you
can compare the SSH key checksum displayed by the switch with the one displayed by the
client to verify that you really are connected to the switch and not another device. Generally,
SSH clients remember the encryption key after the first connection, so you need to check the
key only once.
Syntax: show crypto key ssh
Defaults: None
Access: Enabled
Examples To display SSH key information, type the following command:
DWS-1008# show crypto key ssh
ec:6f:56:7f:d1:fd:c0:28:93:ae:a4:f9:7c:f5:13:04