System information

243
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
STP Commands
vlan vlan-id VLAN name or number. If you do not specify a
VLAN, MSS displays information for blocked
ports on all VLANs.
Defaults: None.
Access: All.
Usage: The command lists information separately for each VLAN.
Examples: The following command shows information about blocked ports on a
switch for the default VLAN (VLAN 1):
DWS-1008# show spantree blockedports vlan default
Port Vlan Port-State Cost Prio Portfast
------------------------------------------------------------------------
6 190 Blocking 4 128 Disabled
Number of blocked ports (segments) in VLAN 1 : 1
The port information is the same as the information displayed by the show spantree
command. See Output for show spantree.
show spantree portfast
Displays STP uplink fast convergence information for all network ports or for one or more
network ports.
Syntax: show spantree portfast [port-list]
port-list List of ports. If you do not specify any ports, MSS displays uplink
fast convergence information for all ports.
Defaults: None.
Access: All.
Examples: The following command shows uplink fast convergence information for all ports: