System information

231

DWS-1008 CLI Reference Guide

D-Link Systems, Inc.

STP Commands

Examples: The following command resets the STP priority on port 9 to the default:

DWS-1008# clear spantree portpri 9

success: change accepted.

clear spantree portvlancost

Resets to the default value the cost of a network port or ports on paths to the STP root bridge

for a speciﬁc VLAN on a switch, or for all VLANs.

Syntax: clear spantree portvlancost port-list {all | vlan vlan-id}

port-list List of ports. The port cost is reset on the

speciﬁed ports.

all

Resets the cost for all VLANs.

vlan vlan-id VLAN name or number. MSS resets the cost for

only the speciﬁed VLAN.

Defaults: None.

Access: Enabled.

Usage: MSS does not change a port’s cost for VLANs other than the one(s) you

specify.

Examples: The following command resets the STP cost for port 12 in VLAN sunﬂower:

DWS-1008# clear spantree portvlancost 12 vlan sunﬂower

success: change accepted.

clear spantree portvlanpri

Resets to the default value the priority of a network port or ports for selection as part of the

path to the STP root bridge, on one VLAN or all VLANs.

Syntax: clear spantree portvlanpri port-list {all | vlan vlan-id}

port-list List of ports. The port priority is reset to 32 (the

default) on the speciﬁed ports.

all

Resets the priority for all VLANs.

vlan vlan-id VLAN name or number. MSS resets the priority

for only the speciﬁed VLAN.