System information

223
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
Access Point Commands
DWS-1008# show dap global
Total number of entries: 8
DAP Serial Id Switch IP Address Bias
1 11223344 10.3.8.111 HIGH
.- 11223344 10.4.3.2 LOW
2 332211 10.3.8.111 LOW
.- 332211 10.4.3.2 HIGH
17 0322100185 10.3.8.111 HIGH
.- 0322100185 10.4.3.2 LOW
18 0321500120 10.3.8.111 LOW
.- 0321500120 10.4.3.2 HIGH
The table describes the fields in this display.
Field Description
-----------------------------------------------------------------------------------------------------------------------
DAP Connection ID you assigned to the Distributed AP.
Note: DAP numbers are listed only for Distributed APs configured
on this switch. If the field contains a hyphen ( -), the Distributed AP
configuration displayed in the row of output is on another switch.
-----------------------------------------------------------------------------------------------------------------------
Serial Id Serial ID of the Distributed AP.
-----------------------------------------------------------------------------------------------------------------------
Switch IP Address System IP address of the switch on which the Distributed AP is
configured. A separate row of output is displayed for each switch on
which the Distributed AP is configured.
-----------------------------------------------------------------------------------------------------------------------
Bias Bias of the switch for the Distributed AP:
•High
•Low
show dap unconfigured
Displays Distributed APs that are physically connected to the network but that are not
configured on any switches.
Syntax: show dap unconfigured
Defaults: None.
Access: Enabled.