System information

222
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
Access Point Commands
AP with serial ID 223344:
DWS-1008# show dap connection serial-id 223344
Total number of entries: 1
DAP Serial Id DAP IP Address Switch IP Address
9 223344 10.10.4.88 10.9.9.11
The table describes the fields in this display.
Field Description
-----------------------------------------------------------------------------------------------------------------------
DAP Connection ID you assigned to the Distributed AP. If the connection
is configured on another switch, this field contains a hyphen ( -).
-----------------------------------------------------------------------------------------------------------------------
Serial Id Serial ID of the Distributed AP.
-----------------------------------------------------------------------------------------------------------------------
DAP IP Address IP address assigned by DHCP to the Distributed AP.
-----------------------------------------------------------------------------------------------------------------------
Switch IP Address System IP address of the switch on which the DWL-8220AP has an
active connection. This is the switch that the DWL-8220AP used for
booting and configuration and is using for data transfer.
show dap global
Displays configuration information for Distributed APs configured on the DWS-1008
switch.
Syntax: show dap global [dap-num | serial-id serial-ID]
dap-num Number of a Distributed AP for which to display configuration settings.
serial-id DWL-8220AP access point serial ID.
serial-ID
Defaults: None.
Access: Enabled.
Usage: To show information only for Distributed APs that have active
connections, use the show dap connection command.
Examples: The following command displays configuration information for all Distributed
APs configured on the DWS-1008 switch: