System information
217
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
Access Point Commands
-----------------------------------------------------------------------------------------------------------------------
CPU info Specifications and identification of the CPU.
For DWL-8220AP models other than DWL-8220AP-1xx or
DWL-8220AP-2xx, the ID portion of this field is not applicable.
-----------------------------------------------------------------------------------------------------------------------
Uptime Amount of time since the DWL-8220AP booted using this link.
Radio 1 type 802.11 type and configuration state of the radio.
Radio 2 type • The configure succeed state indicates that the DWL-8220AP
has received configuration parameters for the radio and the
radio is ready to accept client connections.
• For 802.11b/g radios, 802.11b protect indicates that the radio is
in 802.11b protection mode and is therefore operating only at
802.11b rates.
• Sweep Mode indicates that a disabled radio is nonetheless
participating in rogue detection scans. Even though this message
appears only for disabled radios, all radios, enabled or disabled,
participate in rogue detection.
• Countermeasures Enabled indicates that the radio is sending
countermeasures packets to combat a rogue.
-----------------------------------------------------------------------------------------------------------------------
operational channel The channel on which the radio is currently operating.
-----------------------------------------------------------------------------------------------------------------------
operational power The power level at which the radio is currently operating.
-----------------------------------------------------------------------------------------------------------------------
base mac Base MAC address of the radio.
-----------------------------------------------------------------------------------------------------------------------
bssid, ssid SSIDs configured on the radio and their BSSIDs.
-----------------------------------------------------------------------------------------------------------------------
Port Switch port number connected to the DWL-8220AP.
-----------------------------------------------------------------------------------------------------------------------
Flg Operational status flags for the DWL-8220AP.
For flag definitions, see the key in the command output.
-----------------------------------------------------------------------------------------------------------------------
IP Address IP address of the DWL-8220AP. The address is assigned to the
DWL-8220AP by a DHCP server.
Note: This field is applicable only if the DWL-8220AP is configured
on the switch as a Distributed AP.
-----------------------------------------------------------------------------------------------------------------------
Model DWL-8220AP model number.
-----------------------------------------------------------------------------------------------------------------------
MAC Address MAC address of the DWL-8220AP.
-----------------------------------------------------------------------------------------------------------------------
Radio1 State, channel, and power information for radio 1:
• The state can be D (disabled) or E (enabled).
• The channel and power settings are shown as channel/power.
Radio2 State, channel, and power information for radio 2.
-----------------------------------------------------------------------------------------------------------------------
Uptime Amount of time since the DWL-8220AP booted using this link.