System information

177
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
Access Point Commands
dapauto Sets the radio mode for DWL-8220APs managed by the DWL-8220AP
configuration template.
radio 1 Radio 1 of the DWL-8220AP.
radio 2 Radio 2 of the DWL-8220AP.
mode enable Enables a radio.
mode disable Disables a radio.
Defaults: DWL-8220AP access point radios are disabled by default.
Access: Enabled.
Usage: To enable or disable one or more radios to which a profile is assigned, use
the set ap radio radio-profile command. To enable or disable all radios that
use a specific radio profile, use the set radio-profile command.
Examples: The following command enables radio 1 on the DWL-8220AP access points
connected to ports 1 through 5:
DWS-1008# set ap 1-5 radio 1 mode enable
success: change accepted.
The following command enables radio 2 on ports 1 through 3:
DWS-1008# set ap 1-3 radio 2 mode enable
success: change accepted.
set {ap | dap} radio radio-profile
Assigns a radio profile to an DWL-8220AP radio and enables or disables the radio.
Syntax: set {ap port-list | dap {dap-num | auto}} radio {1 | 2} radio-profile name
mode {enable | disable}
ap port-list List of ports.
dap dap-num Number of a Distributed AP.
dapauto Sets the radio profile for the DWL-8220AP configuration
template.
radio 1 Radio 1 of the DWL-8220AP.
radio 2 Radio 2 of the DWL-8220AP.
radio-profile Radio profile name of up to 16 alphanumeric characters, with
name no spaces.