System information

173
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
Access Point Commands
ap port-list List of ports connected to the DWL-8220AP access points on
which to set the maximum power.
dap dap-num Number of a Distributed AP on which to set the maximum
power.
dapauto Sets the maximum power for radios configured by the
DWL-8220AP configuration template.
radio 1 Radio 1 of the DWL-8220AP.
radio 2 Radio 2 of the DWL-8220AP.
power-level Maximum power setting RF Auto-Tuning can assign to the radio,
expressed as the number of decibels in relation to 1 milliwatt
(dBm). You can specify a value from 1 up to the maximum value
allowed for the country of operation. The power-level can be a
value from 1 to 20.
Defaults: The default maximum power setting that RF Auto-Tuning can set on a radio
is the highest setting allowed for the country of operation or highest setting
supported on the hardware, whichever is lower.
Access: Enabled.
Examples: The following command sets the maximum power that RF Auto-Tuning can
set on radio 1 on the DWL-8220AP access point on port 5 to 12 dBm.
DWS-1008# set ap 5 radio 1 auto-tune max-power 12
success: change accepted.
set {ap | dap} radio auto-tune max-retransmissions
Sets the maximum percentage of client retransmissions a radio can experience before RF
Auto-Tuning considers changing the channel on the radio. A high percentage of retransmissions
is a symptom of interference on the channel.
Syntax: set {ap port-list | dap {dap-num | auto}} radio {1 | 2}
auto-tunemax-retransmissions retransmissions
ap port-list List of ports connected to the DWL-8220AP access points on which to
set the maximum retransmissions.
dap dap-num Number of a Distributed AP on which to set the maximum
retransmissions.
dapauto Sets the maximum retransmissions for radios configured by the
DWL-8220AP configuration template.