System information

157
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
AAA Commands
user last-resort-any
Vlan-Name = foo
mac-user 01:02:03:04:05:06
usergroup eastcoasters
session-timeout = 99
The table below describes the fields that can appear in show aaa output.
Field Description
Default Values RADIUS default values for all parameters.
authport UDP port on the switch for transmission of RADIUS
authorization and authentication messages. The default port is
1812.
acctport UDP port on the switch for transmission of RADIUS accounting
records. The default is port 1813.
timeout Number of seconds the switch waits for a RADIUS server to
respond before retransmitting. The default is 5 seconds.
acct-timeout Number of seconds the switch waits for a RADIUS server to
respond to an accounting request before retransmitting.
The default is 5 seconds.
retrans Number of times the switch retransmits a message before
determining a RADIUS server unresponsive. The default is 3
times.
deadtime Number of minutes the switch waits after determining a
RADIUS server is unresponsive before trying to reconnect with
this server. During the dead time, the RADIUS server is ignored
by the switch. The default is 0 minutes.
key Shared secret key, or password, used to authenticate to a
RADIUS server. The default is no key.
author-pass Password used for outbound authentication to a RADIUS
server, used in conjunction with a last-resort username.
The default is admin.
Radius Servers Information about active RADIUS servers.
Server Name of each RADIUS server currently active.
Addr IP address of each RADIUS server currently active.