System information

147
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
AAA Commands
• Use acl-name.in to filter
traffic that enters the switch
from users via an access
port or wired authentication
port, or from the network
via a network port.
• Use acl-name.out to filter
traffic sent from the switch
to users via an access port
or wired authentication port,
or from the network via a
network port.
Note: If the Filter-Id value
returned through the
authentication and
authorization process does
not match the name of
a committed security ACL in
the switch, the user fails
authorization and is unable
to authenticate.
mobility-profile Mobility Profile attribute for the user. Name of an existing Mobility
(network access Profile, which can be up to
mode only) 32 alphanumeric characters,
with no tabs or spaces.
Note: If the Mobility Profile
feature is enabled, and a user
is assigned the name of a
Mobility Profile that does not
exist on the switch, the user is
denied access.
service-type Type of access the user is One of the following numbers:
requesting. • 2 - Framed; for network user
access