System information

105
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
IP Services Commands
show ntp (continued)
Field Description
NTP client State of the NTP client. The state can be one of the following:
• Enabled
• Disabled
Current update-interval Number of seconds between queries sent by the switch to the
NTP servers for updates.
Current time System time that was current on the switch when you pressed
Enter after typing the show ntp command.
Timezone Time zone configured on the switch. MSS offsets the time reported
by the NTP server based on the time zone.
Note: This field is displayed only if you change the time zone.
Summertime Summertime period configured on the switch. MSS offsets the
system time +1 hour and returns it to standard time for daylight
savings time or a similar summertime period that you set.
Note: This field is displayed only if you enable summertime.
Last NTP update Time when the switch received the most recent update from an
NTP server.
NTP Server IP address of the NTP server.
Peer state State of the NTP session from the point of view of the NTP
server:
• CORRECT
• REJECT
• SELCAND
• SYNCCAND
• SYSPEER
Local state State of the NTP session from the point of view of the switch’s
NTP client:
• INITED
• START
• SYNCED