System information

DWS-1008 CLI Reference Guide

D-Link Systems, Inc.

IP Services Commands

show interface

Displays the IP interfaces conﬁgured on the DWS-1008 switch.

Syntax: show interface [vlan-id]

vlan-id VLAN name or number.

Defaults: If you do not specify a VLAN ID, interfaces for all VLANs are displayed.

Access: All

Usage: The IP interface table ﬂags an address assigned by a DHCP server with an asterisk

( * ).

Examples: The following command displays all the IP interfaces conﬁgured on a DWS-1008

switch:

DWS-1008# show interface

VLAN Name Address Mask Enabled State RIB

------- ------------- ---------------- ------------------- ----------- -------- -----

1 default 10.10.10.10 255.255.255.0 YES Up ipv4

2 mauve 10.10.20.10 255.255.255.0 NO Down ipv4

4 corpvlan * 10.3.1.110 255.255.255.0 YES Up ipv4

The table below describes the ﬁelds in this display.

Field Description

VLAN VLAN number

Name VLAN name

Address IP address

Mask Subnet mask

Enabled Administrative state:

• YES (enabled)

• NO (disabled)

State Link state:

• Up (operational)

• Down (unavailable)

RIB Routing Information Base