User manual

44D-Link DWR-730 User Manual
Section 6 - Troubleshooting
• Congure your Internet settings:
• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore
the settings to their defaults.
• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing
is checked. Click OK.
• Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.
• Close your web browser (if open) and open it.
• Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the
login page for your the web management.
• If you still cannot access the conguration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing
the conguration. If you have multiple computers, try connecting using a dierent computer.
2. How can I upgrade the rmware on the device?
To update the rmware on the DWR-730, connect the device into an available USB port on your PC. Next, log into the WebGUI and navigate to the
Tools tab near the top. Then click on the Firmware Upgrade tab on the left. Browse for the rmware image le and click Upgrade. Please do not
disconnect the DWR-730 while the upgrade is in progress.
Note: For update information, please follow the revision notice on the ocial web site.
3. I’m having problems installing the D-Link Connection Manager.
Your antivirus program may be preventing installation of the software. Try disabling your antivirus software temporarily while you install the D-Link
Connection Manager.