User's Manual

3D-Link DWM-162R User Manual
Table of Contents
3.5 UIM Card Installation
1. Ensure the USB modem is plug off. Remove the back cover.
2. Hold the UIM card with the cut corner oriented as shown and
then slide it into the card holder face down.
3. Replace the back cover.
3.6 MicroSD Card Installation
1. Ensure the USB modem is plug off. Remove the back cover.
2. Hold the MicroSD card with the oriented as shown and then
slide it into the card holder face up.
3. Replace the back cover.
LED Indications Dongle Working Status
Long Burning System initializing
On 0.2s, Off 1.9s, Repeat No Signal / Searching
On 0.2s, Off 0.2s, On 0.2s, Off 1.7s Repeat Idle with Signal
On 0.2s, Off 0.2s, Repeat In used
3.4 LED Indicator Information