DWM-162R User Manual 1. INTRODUCTION...........................................................1 2. FEATURES...................................................................1 3. PRODUCT OVERVIEW................................................1 3.1 PACKING CONTENT............................................1 3.2 SYSTEM REQUIREMENTS.................................1 3.3 HARDWARE OVERVIEW....................................2 3.4 LED INDICATOR INFORMATION........................ 3 3.5 UIM CARD INSTALLATION...
1. Introduction DWM-162R is a CDMA EVDO Rev.A USB dongle. Besides Windows OS, DWM-162R can also be run under MAC environment which makes it become the perfect solution for customization. DWM-162R can support the downlink up to 3.1 Mbps and uplink up to 1.8Mbps. 2.
3.3 Hardware Overview Status Indicator A multi-colored LED indicates connection status information. USB Port Connects the DWM-162R to a computer. MicroSD Card Slot Accepts a MicroSD card (up to 8GB). UIM Card Slot Accepts a UIM card (up to 8GB).
3.4 LED Indicator Information LED Indications Long Burning On 0.2s, Off 1.9s, Repeat On 0.2s, Off 0.2s, On 0.2s, Off 1.7s Repeat Dongle Working Status System initializing No Signal / Searching Idle with Signal On 0.2s, Off 0.2s, Repeat In used 3.5 UIM Card Installation 3.6 MicroSD Card Installation 1. Ensure the USB modem is plug off. Remove the back cover. 2. Hold the UIM card with the cut corner oriented as shown and then slide it into the card holder face down. 3. Replace the back cover. 1.
3.7 Software Installation Before you install the software, you must first install a UIM card into the USB dongle and connect the dongle to a USB port on your computer. 1. The first time you plug in the dongle to your computer, the dongle will run the installation application automatically. 2.
3. Please click “Finish” to finish the installation. Then plug out the dongle and reinsert the dongle to PC. The connection manager will pop up automatically. 4. Now you could use your dongle to go to the internet. 4 Basic Function 4.1 Launching the Connection Manager To Launch the Connection Manager, double-click the shortcut icon of the Connection Manager on the desktop called D-Link Mobile ConnMgr. D-Link DWM-162R User Manual .
4.2 Connection Manager Overview The main menu of the Connection Manager is as below: Icons: Display the Connection Interface. Display the Voice Call Interface. Display the SMS Interface Display the Contacts Interface Display the Call History Interface. Indicate the network signal strength. 4.3 Data Link You can establish a dialup data link over CDMA EVDO/CDMA 1x via the dongle. The dialup data link requires the coverage of CDMA network. 4.3.
4.3.2 To set up a profile To set up a profile, please a. Click the setting menu, b. Enter the Account sub menu, then you will find below interface. c. Click on Edit/New to set up a profile, input the Access Number, the User name and the password, click on Save. 4.4 Voice Call Once you connect to the network, you could make and receive the voice all. Click on the icon to enter the voice call interface. Make sure you have sound card in your PC, and you have speaker and microphone connected on the PC.
4.4.1 To Make a Voice Call You could dial the desired number then click Call button. Then you could make a call. 4.4.2 To Receive a Voice Call Once you connected to the network, you could receive the voice call. When you receive a voice call, there is a window will pop up. Click on the Answer button, you could get the call, click on Refuse to reject the call. 4.5 SMS Once you connect to the network, you could send and receive the SMS. Click on the icon to enter the SMS interface.
4.5.1 To Send a SMS To compose a new message, Click New button, Input the desired number, and input the text, you could send directly, or save to Drafts. 4.5.2 To receive a SMS Once you connected to the network, you could receive SMS. When you receive a SMS, there is a window will pop up. You could find the message in the Inbox also. You could set up where you store the message by clicking on the setting menu, personal setting, SMS setting.
4.6 Contacts You could save the contacts in the connection manager. To create a new contact, click New button, then input the name and the number, click Save. To edit/Delete a contact, click Edit/Delete button. Also you could make a call or send a SMS from Contacts. 4.7 Call History To view Data Link and Call History, please click . The history will save last 3 months history; software will delete the history automatic over 3 months.
FCC statement : Se ction 15.105 (b) Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
