DWM-222 User Manual 2016/04/15 Ver. 1.
Index LTE USB Adapter Introduction .......................................2 Internet service ..............................................................6 SMS service ....................................................................7 Contacts .......................................................................11 USSD .............................................................................14 STATISTICS ....................................................................15 Settings ..............
LTE USB ADAPTER INTRODUCTION 1. To launch the Network Connect, double-click the shortcut icon on the desktop. It should be noted that: If the PIN code enabled, enter the correct one, then click OK. The (U)SIM will be locked after three retries of incorrect PIN code inputting; Enter the correct PUK to retrieve the default PIN code. After ten retries of incorrect PUK code inputting, please contact with your service provider; With the wrong PIN and PUK, all the network services are unavailable.
: Access to check usage statistics : Set parameters options : Help (User Manual) 3. Status information Status New message Message full Description New message(s) arrived. Indicates the (U)SIM’s storage of SMS No device Indicates that system cannot find the device. Initializing Indicates that the device is in the process Searching The device is searching for the network. No service No suitable network.
Invalid (U)SIM card The (U)SIM is out of service. Network signal Network type Data service 4.
Blue blinking Connected to 3G network Purple solid on Register to network (not connect) Purple blinking Connected to 2G network *Blinking: Flash once every 0.
INTERNET SERVICE 1. Connecting with the default connection profile 2. Click to set up the connection; Statistics information The following window will be displayed at lower right corner of main interface when connecting to the internet. 3. Disconnect from the internet Click connection.
SMS SERVICE Click 1. to enter SMS (Short Message Service) service interface. Creating and sending a message. Click : Input the recipient number by one of the following options: Enter the number directly; Click Send to, choose the recipient number from the phonebook and add to the sending list , then click OK. Enter the message content; Click Send or Save to Draft. The message will be saved in the Draft when failed to send.
2. The message cannot expand 2,048 characters at most. Inbox The following prompt box will be displayed when received a new message; Reply : Access the edit interface, write the content, click Send or Save to Draft; Forward Delete : Forward the selected message; : Delete the selected message. Note: 3.
4. 5. Draft The MSG sent unsuccessfully will be saved in the Draft . Click the selected message; Confirm the recipient and the content, and click Send or Save to Draft. Recycle All deleted information will be saved in the Recycle. 6. The selected SMS can be operated as follows: Save number: To save the sender’s information to the (U)SIM card or PC. Delete text message: To delete the selected message. Move to: To move the selected message to Outbox or Draft.
SMS Export Right-click the selected the message; Click SMS Export ; Specify the path and the file name, and click Save. Note: The exported message will be saved as a *.csv file.
CONTACTS Click 1. 2. to enter Contacts interface. New Click ; Enter the Name and Mobile, and save it in the (U)SIM card or PC. Searching a contact Click ; Enter the key characters of you want to find in the ; 3. The result will be displayed in turn.
Edit : Modify the selected contact; Delete Send SMS : Delete the selected contact; : Send a message to the selected contact; Copy to: Copy the contact between (U)SIM card and PC. Note: The deleted contact information cannot be retrieved. 4. 5. Import Right-click the mouse; Click Contacts Import; Select the *.vcf or *.csv file and click Open; The import file will be saved in the current interface.
Confirm the name and the path the file saved, then click Save.
USSD Click to enter USSD interface. You can add, edit, delete, and send USSD operation. The result of sending will display on the edit box.
STATISTICS Click to enter STATISTICS interface. View various connection statistics.
SETTINGS Click 1. to list the functions. PIN Management Enable PIN Click Enable PIN; Enter the correct PIN code and click OK. Note: The PIN code should be a numeric string of 4-8 digits. Disable PIN Click Disable PIN; Enter the correct PIN code and click OK. Modify PIN Click Modify PIN; Enter the old PIN code and new PIN code, confirm the new PIN code and click OK.
2. Options (also can use ) General You may choose the alert tone when connected/disconnected to the internet. Text Message Setting You may active the message alert tone, and also can set up your favorite tone via selecting a *.wav file in the PC. The number showed in the SMS center is read from the (U)SIM card automatically; modification is not recommended; Note: SMS would not work with the wrong SMSC. Contact with the service provider to get the correct SMSC.
You can choose Auto or Only UMTS/HSPA or Only GPRS/EDGE. The device will Register network according to the selected mode. The default mode is Auto. Registration Mode Auto search and Register is set as default value; Select Manual search and Register before dialing, available networks will be listed when finished; Select an available network and click Register, and then the device will try to Register.
3. Contacts Import For more details, refer to Internet Contacts-4. 4. Contacts Export For more details, refer to Internet Contacts-5. 5. SMS Export For more details, refer to Internet Text Message-5. 6. 7. Help &About Help: To open the User Manual About: To get the Connection Manager information.
FAQS 1. Q: What shall I do if I cannot connect to the internet? A: Checking Setting and check the Profile is correct to match the (U)SIM card operator. If not, can manual to enter the APN information to connect to the internet. 2. Q: Why can’t I receive the message? A: Please confirm whether the (U)SIM’s SMS memory is full or not. 3. Q: Why the software doesn’t run automatically when the device is plugged in? A: Click My computer->data card disk->StartModem.exe.
TECHNICAL SPECIFICATIONS GSM Band (GSM/GPRS/EDGE) Quad-band 850/900/1800/1900 MHz Power Class 4 (850/900 MHz) Power Class 1 (1800/1900 MHz) DC-HSPA+/ HSDPA/HSUPA/UMTS 900/2100 MHz Power Class 3 (+24 dBm) Data Rates DC-HSPA+：DOWNLINK UP TO 42 Mbps/ UPLINK UP TO 5.76 Mbps HSDPA/HSUPA：DOWNLINK UP TO 14.4 Mbps / UPLINK UP TO 5.
FDD-LTE：DOWNLINK UP TO 150 Mbps / UPLINK UP TO 50 Mbps Antenna Internal main and diversity antenna LED Status Indicators 1 Signal LED Red (blinking): No SIM card/ Error Green (Solid On): Register to network (not connect) Green blinking: Connected to 4G network Blue (solid on): Register to network (not connect) Blue blinking: Connected to 3G network Dimensions (L x W x H) 103mm x 34mm x 11.
