User's Manual

¾ Transmit Rate:

You can choose one of the transmission rates as follows, 54Mbps,

48Mbps,36Mbps,24Mbps,22Mbps,18Mbps,12Mbps,11Mbps,9Mbps,

6Mbps, 5.5Mbps, 2Mbps, 1Mbps, Fully Automatic and Turbo Mode.

In some specific wireless devices, the transmit rate can define up to

72Mbps for 802.11g and 22Mbps for 802.11b, select the Turbo Mode

function to enhance the transfer rate of the wireless connection.

The Fully Automatic and Turbo Mode will automatically detect the

suitable linking transfer rate and auto fall back when the signal is not

too strong to transmit data.

¾ Power Saving:

To set your Wireless PCI Adapter as power saving mode, select “Off”,

“Normal” or “Maximum”.

¾ Transmit Power:

By selecting the Transmit Power, you can select the Radio Frequency

output power from Minimum, 12.5%, 25%, 50%,100% or Auto.

¾ Preamble Type:

The usage of the preamble is to limit the packet size of the data to

transmit. It is recommended to choose the short preamble when the

link quality is bad, it is to prevent the wasting time of resending a long

packet that is lost. The Default is Auto which access short and long

preamble.