User Manual

14
Using the Configuration Utility (continued)
Power Mode:
Disable -This default setting consumes the most power.
Enable - This setting consumes the least power.
Preamble:
The default setting is Auto. The preamble selection is automatically detemined
by the DWL-G122.
Security
Keys 1-4:
Select the default key.
Security:
Check this checkbox if you would like security.
Auth. Mode:
Select Open/Shared Authentication, WPA, WPA-PSK, WPA2, or WPA2-PSK.
Key Format:
Select either Hex or ASCII.
Key Length:
Select either 64 Bits or 128 Bits.