User's Manual Part 2

Getting Started

Setting Up an 802.1x Network

Here is a sample of a network setup using the 802.1x compliant DWL-700AP access

point.Your network may look different. For successful communication, you will need 802.1x

compliant devices, including 802.1x compliant wireless network adapters. If you are

using two or more access points in conjunction for load-balancing or backup, please

remember to keep the ethernet cable connection between the access points. An ethernet

connection is needed so that IAPP (Inter Access Point Protocol) can be used to enable

these functions.

Please read through the configuration section of this manual to learn about the settings

you will need for your devices to achieve a faster, safer and more effective wireless net-

work than you have previously experienced.

700AP