User Manual

92
DWL-2700AP User’s Manual
D-Link Systems, Inc.
Using the Console Port
You can connect to the DWL-2700AP console port to configure device settings via the
command line.
2. Run HyperTerminal on the PC:
• Go to the Start Menu
• Select All Programs
• Select Accessories
• Select Communications
• Select HyperTerminal
1. Connect one end of the provided serial console cable to the console port on the
DWL-2700AP, and the other to an available serial port on the PC you wll use to connect
to the device.
3. Enter a New Connection name: