User Manual

14
DWL-2700AP User’s Manual
D-Link Systems, Inc.
Connecting To a PoE (Power over Ethernet) Network
Connect one end of an Ethernet cable (included with your package) to the
LAN port on the DWL-2700AP and the other end of the Ethernet cable to
the port labeled P+DATA OUT on the PoE base unit.
Connect another Ethernet cable from the DATA IN port on the PoE base
unit to your router/switch or to a PC.
Attach the power adapter to the connector on the PoE base unit. Attach the
power cord to the power adapter and into an electrical outlet.
Step 1:
Getting Started
Step 2:
Step 3: