Datasheet

Unied AX and AC Wave 2 Wireless Access Points
D-Link Smart Antenna
The DWL-6620APS features D-Link Smart Antenna technology that helps to
select the optimal radiation pattern for each client and uses digital beam
forming to enhance the antenna gain and achieve optimal throughput. In
addition, the D-Link Smart Antenna supports multiple radio patterns to
dynamically adapt to dierent kinds of environments. Meanwhile, the fast
channel and bandwidth selection features always look for the best channel
with the least interference for smoother performance. With these capabilities,
the DWL-6620APS ensures a reliable connection reliability and optimized
wireless user experience.
Tri-Band Wi-Fi
The DWL-7620AP is equipped with tri-band wireless technology featuring
one 2.4 GHz and two 5 GHz wireless bands to accommodate the increasing
number of devices connecting to a single access point. By allowing older
802.11b/g/n devices to connect to the 2.4 GHz band, the two 5 GHz bands
can be dedicated to newer, faster wireless AC devices allowing them to enjoy
seamless bandwidth-intensive applications such as HD video streaming, VoIP,
and le sharing. Thanks to intelligent band steering technology, the DWL-
7620AP can also eciently load balance clients and trac between the three
wireless bands to ensure all wireless clients have a better user experience in
environments with high density.
Centrally Managed
When working in conjunction with D-Link Unied Controllers, the
Unied AX and AC Wave 2 Wireless Access Points can be centrally managed.
This allows for a large number of access points to be deployed and managed
easily and eciently. Once the APs have been discovered by the controller,
the administrator can push the conguration to them as a group, instead of
conguring each access point individually. Additionally, Radio Frequency (RF)
resource management
1
allows wireless coverage to be managed centrally,
providing the best coverage possible for wireless clients.
Easy to Install
The DWL Series can be ceiling mounted or wall mounted to meet the
needs of any wireless application. For additional exibility, all D-Link
Unied AX and AC Wave 2 Wireless Access Points have integrated Power over
Ethernet (PoE) support, allowing the devices to be installed in areas where
power outlets are not readily available.
Automatic Radio Frequency (RF) Management
When access points are deployed in close proximity to each other, there may
be interference between channels if RF management is not implemented.
When one of the DWL Series AC Access Points senses a neighbor nearby, it
will automatically select a non-interfering channel. This greatly reduces RF
interference and will allow the administrator to deploy APs more densely. To
further minimize interference, when a nearby AP is on the same channel, the
D-Link Unied AC Wave 2 Access Point will automatically lower its transmission
power
2
. When a nearby AP is no longer present, the access point will increase
its transmission power to expand coverage.
Advanced Wireless Features
The D-Link Unied AX and AC Wave 2 Wireless Access Points support
802.1p Quality of Service (QoS) for enhanced throughput and better
performance of time-sensitive trac like VoIP and streaming DSCP. All
D-Link Unied AX and AC Wave 2 Wireless Access Points support Wi-Fi
Multimedia (WMM), so in the event of network congestion, time-sensitive
trac can be given priority ahead of other trac. Furthermore, when a
number of access points are in close proximity to each other, an access point
will refuse new association requests once its resources are fully utilized,
allowing the association request to be picked up by a neighboring unit,
distributing the load over multiple APs. Band steering technology enables
D-Link’s Unied AX and AC Wave 2 Wireless Access Points to intelligently
place clients on the optimal wireless band to avoid congestion and allows
for smooth streaming of video, seamless browsing, and fast downloads for
mobile devices. Airtime Fairness ensures that equal airtime is given to each
client, providing increased performance even if slower devices are connected.
802.11k Fast Roaming
2
is also supported, which allows the wireless client to
roam seamlessly between access points.
Wi-Fi 6
The DWL-X8630AP is the latest model of D-Link DWL Series, utilizing 802.11ax
technology (also known as Wi-Fi 6). 11ax includes 1024-QAM modulation,
which surpasses speed limitations in both 2.4 GHz and 5 GHz bands. OFDMA
(Orthogonal Frequency Division Multiple Access) and uplink/downlink MU-
MIMO (multi-user – multiple input multiple output) boosts channel capacity
and eciency, enabling more clients to access the network. The DWL-X8630
boasts up to 4 special streams with channel bandwidths up to 160 MHz (in
5 GHz, 40 MHz in 2.4 GHz). This AX3600 AP achieves 2402 Mbps PHY on 5
GHz and 1147 Mbps PHY on 2.4 GHz. The DWL-X8630AP’s built-in 2.5 GbE
PoE port unlocks the door to ‘multi-gigabit’ Wi-Fi, making AX3600 technology
essential for increasing your network’s speed and bandwidth.