Installation guide

18
Using the Conguration Utility (continued)
Tools > Admin
New Password: Enter the
new password.
Conrm Password:
Re-enter the password to
conrm it.
Tools > System
Save Settings: The current
system settings can be saved
as a le onto the local hard
drive.
Load Settings: The saved
le or any other saved setting
file can be loaded back on
the access point. To reload
a system settings file, click
on Browse to browse the
local hard drive and locate the
system le to be used. Click
Load when you have selected
the le to be loaded back onto
the access point.
Restore: You may also reset the DWL-G700AP back to factory settings by clicking
on Restore. Make sure to save the unit’s settings before clicking on Restore. You will
lose your current settings when you click Restore.