Installation guide
10
Using the Conguration Utility (continued)
Home > Wireless
Mode: Select Access Point mode, AP Client mode or Repeater mode
SSID: (Service Set Identier) Default is the default setting. The SSID is a unique
name that identies a network. All devices on a network must share the same SSID
name in order to communicate on the network. If you choose to change the SSID from
the default setting, input your new SSID name in this eld.
Site Survey: If you select the AP Client or Repeater mode, you can click this button
to choose the root AP from an available connection list.
Channel: Channel 6 is the default channel. Input a new number if you want to change
the default setting. All devices on the network must be set to the same channel to
communicate on the network.
Authentication: Select the level of security for your wireless network:
Open System: Select Open System to communicate the key across the network.
Shared Key: Select Shared Key to limit communication only to those devices that
share the same WEP settings.
WPA /WPA2: Select to use WPA (Wi-Fi Protected Access) authentication in conjunction
with a RADIUS server.
WPA-PSK/WPA2-PSK: Select to use WPA-PSK or WPA2-PSK without a
RADIUS server.