Installation guide

Make sure that the SSID on the D-Link DWL-G630 Wireless G
Notebook Adapter is exactly the same as the SSID on the access
point or wireless router.
Move the DWL-G630 and access point or wireless router into the
same room and then test the wireless connection.
Disable all security settings. (WEP, MAC Address Control, AES).
M
ake sure that the access point/router is not set to a different
frequency.
Turn off your access point and the computer with the DWL-G630.
Turn on the access point, and then turn on the computer with the
DWL-G630.
Refresh the DWL-G630 Utility.
Make sure that the D-Link DWL-G630 Wireless G Notebook Adapter
is properly seated in the computer’s Cardbus slot.
If Windows does not detect the hardware upon insertion of the
adapter, make sure to completely remove drivers that were
previously loaded. To remove the drivers, do the following:


Check to see if the DWL-G630 Notebook adapter is fi rmly inserted
into the PCI slot of your laptop computer.
Reset the access point to its factory default settings and restore
the DWL-G630 Notebook adapter to the factory default settings.
Troubleshooting (continued)








5.
2. I cannot connect to the access point or the wireless router.
3. The DWL-G630 Power and Link lights are not on.
4. I forgot my Encryption key.
The computer does not recognize the D-Link DWL-G630
Wireless Cardbus Adapter.
48