Specifications

Using the AP Manager (continued)

Device Conguration>AP Mode

• Access Point: The default setting used to create a wireless LAN.

• WDS with AP: Allows you to connect multiple wireless LANs together,while still functioning

as an AP.If enable, you must enter the MAC address of the other DWL-2100APs.

• WDS: Allows you to connect mulitple wireless LANs together. All other LANs must be

using DWL-2100APs.When enable , you must enterthe MAC address of the other

DWL-2100APs.

• AP Repeater: Allows you to repeat the wireless signal of the root access point. When

enabled you must enter the MAC address of the root access point.

• AP Client: Allows any device with an Ethernet connection to connect to the wireless

network via another DWL-2100AP, such as a printer, gaming console (Xbox, PS2), or

a computer. You will need to enter the SSID of the DWL-2100AP that is functioning as

an AP.