User`s manual

83
DWS-1008 User’s Manual
D-Link Systems, Inc.
Conguring and Managing Ports and VLANs
Boot Time: 2000-03-18 22:59:19
Uptime: 0 days 00:13:45
=============================================================
Fan status: fan1 OK fan2 OK fan3 OK
Temperature: temp1 ok temp2 ok temp3 ok
PSU Status: Lower Power Supply DC ok AC ok Upper Power Supply missing
Memory: 156.08/496.04 (31%)
Total Power Over Ethernet : 0.000
=============================================================
3. Congure ports 2 through 6 for connection to access point model DWL-8220AP and verify
the conguration changes.
Type the following commands:
DWS-1008# set port type ap 2-6 model dwl-8220ap poe enable
This may affect the power applied on the configured ports. Would you like to
continue? (y/n) [n]y
success: change accepted.
DWS-1008# show port status
Port Name Admin Oper Config Actual Type Media
=============================================================
1 mgmt up up auto 100/full network 10/100BaseTx
2 finance up up auto 100/full ap 10/100BaseTx
3 accounting up up auto 100/full ap 10/100BaseTx
4 shipping up up auto 100/full ap 10/100BaseTx
5 lobby up up auto 100/full ap 10/100BaseTx
6 conf_room1 up up auto 100/full ap 10/100BaseTx
7 backbone up down auto network
8 backbone up down auto network
DWS-1008# show port poe
Link Port PoE PoE
Port Name Status Type config Draw(Watts)
=============================================================
1 mgmt up - disabled off
2 finance up AP enabled 7.04
3 accounting up AP enabled 7.04
4 shipping up AP enabled 7.04
5 lobby up AP enabled 7.04
6 conf_room1 up AP enabled 7.04
7 backbone down - - invalid
8 backbone down - - invalid