User`s manual

50
DWS-1008 User’s Manual
D-Link Systems, Inc.
Configuration (continued)
Conguration
DWS-1008# show aaa
Default Values
authport=1812 acctport=1813 timeout=5 acct-timeout=5 retrans=3
deadtime=0 key=(null) author-pass=(null)
Radius Servers
Server Addr Ports T/o Tries Dead State
--------------------------------------------------------------------------------------
svr1 10.10.70.20 1812 1813 5 3 0 UP
svr2 10.10.70.40 1812 1813 5 3 0 UP
Server groups
grp1 (load-balanced): svr1 svr2
set authentication dot1x ssid private_wlan EXAMPLE\* peap-mschapv2 grp1
Displaying and Saving the Conguration
MSS immediately implements conguration changes by updating the device’s running
conguration. The software does not automatically retain conguration changes after
a software reboot or a power cycle. To review and save conguration changes, use the
following commands:
show cong [area area] [all]
save cong
The show cong command without the all option displays only those conguration changes
that are different from the default settings of the switch and its access points. The all option
displays the entire conguration including the default values of all parameters.