User`s manual

38
DWS-1008 User’s Manual
D-Link Systems, Inc.
Configuration (continued)
Conguration
Parameter Default Value Radio Behavior When Parameter Set To Default Values
psk-phrase No passphrase Uses dynamically generated keys rather than
dened statically congured keys to authenticate WPA
clients.
psk-raw No preshared Uses dynamically generated keys rather than
key dened statically congured keys to authenticate WPA
clients.
rsn-ie disable Does not use the RSN IE in transmitted frames.
shared-key-auth disable Does not use shared-key authentication. This
parameter does not enable PSK authentication for
WPA. To enable PSK encryption for WPA, use the
set radio-prole auth-psk command.
ssid-name default Uses the SSID name default.
ssid-type crypto Encrypts wireless trafc for the SSID.
tkip-mc-time 60000 Uses Michael countermeasures for 60,000 ms
(60 seconds) following detection of a second MIC
failure within 60 seconds.
wep key-index No keys dened Uses dynamic WEP rather than static WEP.
wep active- 1 Uses WEP key 1 for static WEP encryption of
multicast-index multicast trafc if WEP encryption is enabled and
keys are dened.
wep active- 1 Uses WEP key 1 for static WEP encryption of
unicast-index unicast trafc if WEP encryption is enabled and
keys are dened.
wpa-ie disable Does not use the WPA IE in transmitted frames.