User`s manual

402
DWS-1008 User’s Manual
D-Link Systems, Inc.
Appendix B - Supported RADIUS Attribites
Class 25 Yes No Yes If received, this information must be
sent on, without interpretation, in all
subsequent packets sent to the RADIUS
server for that client session.
Vendor-
Specic
26 Yes No Yes String. Allows MSS to support D-Link
VSAs.
Session-
Timeout
27 Yes No Maximum number of seconds of service
allowed the user before reauthentication
of the session.
Note. If the global reauthentication
timeout (set by the set dot1x reauth-
period command) is shorter than the
session-timeout, MSS uses the global
timeout instead.
Called-
Station-
Id
30 No Yes Yes
For IEEE 802.1X authenticators, stores
the DWL-8220AP access point MAC
address in uppercase ASCII format, with
octet values separated by hyphens (for
example, 00-10-A4-23-19-C0).
Calling-
Station-Id
31 No Yes Yes For IEEE 802.1X authenticators,
stores the supplicant MAC address
in uppercase ASCII format, with octet
values separated by hyphens (for
example, 00-10-A4-23-19-C0).
NAS-
Identier
32 No Yes No Name of the RADIUS client originating
an Access-Request. The value in the
current release is trapeze and cannot be
changed.
Acct-Status-
Type
40 No No Yes Valid values:
• Acct-Start
• Acct-Interim-Update
• Acct-Stop
Acct-Delay-
Time
41 No No Yes Time in seconds for which the client has
been trying to send the record.