User`s manual

367
DWS-1008 User’s Manual
D-Link Systems, Inc.
Managing System Files
Kernel: 3.0.0#43: Wed Jun 30 05:17:44 PDT 2004
BootLoader: 1.19 / 1.7.4
To also display DWL-8220AP access point information, type the following command:
DWS-1008# show version details
Mobility System Software, Version: 3.0.0
Copyright (c) 2003,2004 by D-Link Systems, Inc
Build Information: (build#75) TOP 2004-06-30 07:25:00
Model: DWS-1008
Hardware
Mainboard: version 0 ; FPGA version 0
PoE board: version 1 ; FPGA version 6
Serial number 0321300013
Flash: 3.0.0.375 - md0a
Kernel: 3.0.0#43: Wed Jun 30 05:17:44 PDT 2004
BootLoader: 1.19 / 1.7.4
Port/DAP AP Model Serial # Versions
-------- --------------- ----------- ------------------------
- /5 DWL-8220AP 0123456789 H/W : A3
F/W1 : 5.6
F/W2 : 5.6
S/W : 3.0.0
- /6 DWL-8220AP 9876543210 H/W : A3
F/W1 : 5.6
F/W2 : N/A
S/W : 3.0.0
Displaying Boot Information
Boot information consists of the MSS version and the names of the system image le and
conguration le currently running on the switch. The boot command also lists the system
image and conguration le that will be loaded after the next reboot. The currently running
versions are listed in the Booted elds. The versions that will be used after the next reboot
are listed in the Congured elds.
To display boot information, type the following command:
DWS-1008# show boot
Configured boot image: boot0:020003.020
Configured boot configuration: file:newconfig
Booted version: 2.0.3
Booted image: boot1:020101.020
Booted configuration: file:configuration
Product model: DWS-1008