User`s manual

362
DWS-1008 User’s Manual
D-Link Systems, Inc.
Rogue Detection and Countermeasures
Displaying RF Detection Information
You can use the CLI commands listed in the table below to display rogue detection
information.
Command Description
show rfdetect clients
[mac mac-addr]
Displays all wireless clients
detected on the air.
show rfdetect counters Displays statistics for rogue
and Intrusion Detection System
(IDS) activity detected by the
APs managed by a switch.
show rfdetect data Displays information about all
BSSIDs detected on the air,
and labels those that are from
rogues or interfering devices.
show rfdetect visible mac-addr
show rfdetect visible
ap ap-num [radio {1 | 2}]
show rfdetect visible
dap dap-num [radio {1 | 2}]
Displays the BSSIDs detected
by a specic D-Link radio.
show rfdetect vendor-list Displays the list of OUIs that are
allowed on the network. An OUI
identies a piece of networking
equipment’s vendor.
show rfdetect ssid-list Displays the list of SSIDs that
are allowed on the network.
show rfdetect black-list Displays the list of wireless
clients that are both allowed on
the network.
show rfdetect attack-list Displays the list of wireless
devices that you want APs to
attack with countermeasures.
show rfdetect ignore Displays the BSSIDs of third-
party devices that MSS ignores
during RF detection scans.