User`s manual

336
DWS-1008 User’s Manual
D-Link Systems, Inc.
Managing 802.1X
Viewing 802.1X Clients
Type the following command to display active 802.1X clients:
DWS-1008# show dot1x clients
MAC Address State Vlan Identity
--------------------------------------------------------------------------------------------------------------
00:20:a6:48:01:1f Connecting (unknown)
00:05:3c:07:6d:7c Authenticated vlan-it EXAMPLE\smith
00:05:5d:7e:94:83 Authenticated vlan-eng EXAMPLE\jgarcia
00:02:2d:86:bd:38 Authenticated vlan-eng [e-mail]
00:05:5d:7e:97:b4 Authenticated vlan-eng EXAMPLE\hosni
00:05:5d:7e:98:1a Authenticated vlan-eng EXAMPLE\tsmith
00:0b:be:a9:dc:4e Authenticated vlan-pm [e-mail]
00:05:5d:7e:96:e3 Authenticated vlan-eng EXAMPLE\geetha
00:02:2d:6f:44:77 Authenticated vlan-eng EXAMPLE\tamara
00:05:5d:7e:94:89 Authenticated vlan-eng EXAMPLE\nwong
00:06:80:00:5c:02 Authenticated vlan-eng EXAMPLE\hhabib
00:02:2d:6a:de:f2 Authenticated vlan-pm [e-mail]
00:02:2d:5e:5b:76 Authenticated vlan-pm EXAMPLE\natasha
00:02:2d:80:b6:e1 Authenticated vlan-cs [e-mail]
00:30:65:16:8d:69 Authenticated vlan-wep MAC authenticated
00:02:2d:64:8e:1b Authenticated vlan-eng EXAMPLE\jose
Viewing the 802.1X Conguration
Type the following command to display the 802.1X conguration:
DWS-1008# show dot1x cong
802.1X user policy
---------------------------
‘EXAMPLE\pc1’ on ssid ‘mycorp’ doing EAP-PEAP (EAP-MSCHAPv2)
‘EXAMPLE\bob’ on ssid ‘mycorp’ doing EAP-PEAP (EAP-MSCHAPv2) (bonded)
802.1X parameter setting
--------------------------------------------------------
supplicant timeout 30
auth-server timeout 30
quiet period 5
transmit period 5
reauthentication period 3600
maximum requests 2
key transmission enabled
reauthentication enabled
authentication control enabled
WEP rekey period 1800
WEP rekey enabled
Bonded period 60